Best current price£197.81from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£197.81Visit shop Knipex Crimping Lever Pliers 5063806071297
Visit shop
B&Q£205.88Visit shop B&Q - Crimping Lever Pliers Multi Colour (For Insulated Terminals & Plug Connectors)
Visit shop3 offers from £197.81 - £205.88
View price history by clicking the chart icon.
These Knipex KPX 9752 06 crimping pliers are designed for professionals and serious DIYers who need to crimp electrical connections with reduced hand effort. The key benefit is their optimized lever ratio, which significantly decreases the force required for crimping, especially for larger diameters, thanks to a two-hand operation. A potential caveat is that the two-hand operation might require a brief adjustment period for users accustomed to single-handed tools.
| Model Part Number | KPX975206 |
|---|---|
| Brand | Knipex |
They feature an optimized lever ratio that amplifies the force applied by the user, reducing the actual hand force needed by up to 30% compared to conventional crimping pliers.
Yes, these pliers are suitable for crimping various types of electrical terminals onto single or stranded wire conductors, provided the correct terminal and wire gauge are used with the appropriate die.
The integral lock ensures a complete crimp cycle. It automatically releases only when the correct, predetermined pressure has been applied, preventing under-crimping and ensuring a reliable connection.
Adjustable pressure allows you to fine-tune the tool for different types of terminals or wire sizes, and it helps reduce user fatigue during prolonged or extensive crimping tasks.
They are constructed from specially hardened and tempered special tool steel, known for its strength and durability.
The Knipex KPX 9752 06 crimping pliers have a length of 250mm.
While designed for general use, the ergonomic handles and two-hand operation make them comfortable for most users. However, the primary operation is not specifically ambidextrous.
Ensure the correct die size is being used for the terminal and wire gauge. Check if the crimping pressure is adjusted too low. Verify the terminal is fully seated in the die before crimping. The integral lock should engage and release automatically upon sufficient pressure; if not, the tool may require adjustment or service.
Check for obstructions or debris in the jaws or mechanism. Ensure the integral lock has released properly after the previous crimp. For very large wire gauges, the two-hand operation is essential to overcome resistance.
Clean the pivot points and moving parts of the pliers. Apply a small amount of appropriate tool lubricant to the pivot. If stiffness persists, inspect for damage or wear.
Setup: The Knipex KPX 9752 06 are ready for use straight out of the packaging. Ensure the crimping dies are clean and free from debris before use. The adjustable crimping pressure can be set by locating the adjustment mechanism (refer to the tool's specific markings or manual if unsure). For initial use, it is recommended to test the tool on scrap wire and terminals to familiarize yourself with the feel and the self-releasing lock.
Compatibility: These pliers are designed for general-purpose crimping of various electrical terminals. Compatibility depends on the specific terminal type and wire gauge for which the dies are designed. Always ensure you are using the correct die set for the terminal you are crimping to achieve optimal results.
Care: Keep the tool clean and dry when not in use. Periodically wipe down the handles and head with a dry cloth. For deeper cleaning, a slightly damp cloth can be used, but ensure the tool is thoroughly dried afterward. Avoid using harsh solvents. Inspect the crimping dies for wear or damage; replace if necessary. Store in a dry environment to prevent corrosion.
