Mountfield HW531 PD - 53cm

Refer to the owner's manual; typically, change the oil after the first 5 hours of use and then every 25-50 hours, or annually.

Use unleaded petrol. Check the owner's manual for the correct octane rating.

Remove the blade (after removing the spark plug cap), and use a file or have it professionally sharpened. Always balance the blade after sharpening.

Drain the fuel, clean the mower, remove the spark plug, and add oil into the cylinder, then store in a dry place. Charge the battery if applicable.

The mulch plug prevents grass clippings from being discharged, allowing them to be finely cut and returned to the lawn as fertilizer.

Use the wash link to flush the underside of the deck. Alternatively, tip the mower carefully (after removing the spark plug cap) and scrape away grass clippings.

The Mountfield HW531 PD comes with a 5-year warranty.

Check fuel level, ensure the spark plug is connected correctly, and inspect the engine oil level. Prime the engine and try again.

Check the blade for damage and ensure it is securely attached. Level the cutting deck if necessary. Ensure the lawn is reasonably even.

Check the fuel cap vent is clear, the air filter isn't blocked, and the fuel line is clear. Reduce the cutting height if the grass is too thick.

Check the drive belt for wear or damage. Ensure the wheels are free to rotate. Inspect the drive mechanism for any blockages.

Reduce cutting height. Ensure the grass isn't too wet. Clean any blockages in the chute.