Best current price£137.41from B&Q
Shopping.co.uk recommended and popular offers
B&Q£137.41Visit shop B&Q - 6 Ports Water Underfloor Heating Manifold With 15mm Pipe Connections 1 Inch Ball ValvesAutomatic Air Vent Psw Tradesuppliers Ltd
Visit shop2 offers from £137.41
View price history by clicking the chart icon.
The Warmer Underfloor Heating Manifold is designed for homeowners and installers seeking efficient, multi-zone temperature control for their underfloor heating systems. Its key benefit is the ability to manage multiple zones independently, allowing for customized comfort and potential energy savings. A minor caveat is that it requires standard plumbing tools for installation and may necessitate professional help for complex setups. This comprehensive manifold system features 6 ports for efficient water distribution, 15mm pipe connections, main isolating ball valves, an automatic air vent, and a pressure gauge with a filling/drain-off valve.
| Brand | B&Q |
|---|
This manifold is designed with 6 ports, allowing it to control up to six separate heating zones independently.
The manifold is equipped with standard 15mm pipe connections for integration with your underfloor heating pipework.
No, the main isolating ball valves allow you to shut off flow to the manifold, and the filling/drain-off valve allows you to drain only the manifold or specific sections for maintenance.
The manifold features an automatic air vent to continuously remove air. You can also manually bleed air using the filling/drain-off valve.
The pressure gauge allows you to monitor the water pressure within your underfloor heating system, ensuring it operates safely and efficiently.
The manifold is designed for easy installation with standard plumbing tools. However, if you are not experienced with plumbing systems, professional installation is recommended to ensure a safe and effective setup.
The manifold is constructed from high-quality brass for durability and long-lasting performance.
Check the flow meters on each port. Ensure they are open and adjusted correctly for each zone. Purge any trapped air from the system using the automatic air vent or manually via the drain-off valve.
Check the system for leaks. If no leaks are apparent, use the filling/drain-off valve to add water to the system until the pressure is in the recommended range (typically 1-2 bar).
Turn off the water supply to the manifold. Inspect the connections, tighten any loose fittings, or re-seal connections with appropriate PTFE tape or sealant if necessary.
This indicates trapped air. Open the automatic air vent to release trapped air. If the noise persists, manual bleeding via the drain-off valve may be required.
Ensure the main isolating ball valves on the manifold are fully closed before attempting any maintenance on individual zones. If a valve is stiff, it may require lubrication or replacement.
Setup:
Compatibility:
Care:
