TECTAKE Sonic Wall Acoustic Panels - Light Gray Oak - Set of 2

The number of panels needed depends on the size of your room and the level of sound absorption desired. Calculate the wall surface area and consider the panel dimensions to determine the required quantity.

It is not recommended to paint the panels as it may affect their acoustic properties. The panels are designed to provide the best performance with their original finish.

You'll need a measuring tape, level, pencil, adhesive or screws, a drill (if using screws), and a saw for cutting panels to size.

While the panels can be installed on ceilings, ensure the ceiling surface is capable of supporting the panel weight. Use appropriate fasteners or adhesive and consider professional installation.

The slats are not glued to the backing board. They are easily removable to customize the panel according to your design needs. Be sure to check what is behind the slats to not cause unwanted damage.

The panels are made of MDF and real wood veneer. While they are not specifically fire-rated, they are designed with standard construction materials.

Check the retailer's return policy for details on returns and exchanges. Ensure the panels are in original condition and packaging.

Ensure the wall surface is clean and dry. Use a high-quality construction adhesive and apply sufficient pressure during installation. Consider using additional support, such as tape, during the adhesive drying process.

Use a level during installation to ensure panels are aligned correctly. Re-adjust panels if necessary, and use shims if the wall surface is uneven.

Ensure adequate panel coverage for the room size. Experiment with panel placement, focusing on areas with significant sound reflection. Consider adding additional panels.

Double-check measurements before cutting. Use a fine-tooth saw for clean cuts. If errors occur, the panel can be repositioned or replaced if extra sets were purchased.