Green Stuff World Epoxy Resin - 10624
Best current price£20.35from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£20.35Visit shop Green Stuff World GSW10624 - Epoxy Resin - Crystal Clear - New
Visit shopeBay£20.35Visit shop All Offers
3 offers from £20.35 - £24.26
View price history by clicking the chart icon.
eBayGreen Stuff World GSW10624 - Epoxy Resin - Crystal Clear - New
£17.15 delivery
£20.35
Visit shop
Epoxy Resin - Crystal Clear - Water Effect Rivers Dioramas Scale Models Terrain£7.80 delivery£24.26Visit shop →
OnBuy.comGreen Stuff World Clear Epoxy Resin Two-Part 10624 8435646501246
Free delivery in 1–3 days
£21.95
Visit shop
Product Information
Full details
This guide is for hobbyists, model builders, and wargamers looking to create realistic water effects and durable, high-gloss finishes. The key benefit is its ease of use and excellent detail reproduction for scenic elements. A caveat is the need for proper mixing ratios to achieve optimal results. Green Stuff World Epoxy Resin (MPN: 10624) is a two-part synthetic material designed for art and craft projects, offering a low-viscosity, self-leveling solution for creating clear water, puddles, and other visual effects in dioramas and terrain.
All features
| Model Part Number | 10624 |
|---|---|
| Brand | Green Stuff World |
Extended Product Information
FAQs
What is the mixing ratio for this epoxy resin?
The standard mixing ratio is 1:1 by volume for both parts. Always refer to the product packaging for the most accurate instructions.
How long does it take for the resin to cure?
The working time is approximately 30-45 minutes, and it typically cures hard within 24-48 hours. Full hardness may take several days depending on temperature and humidity.
Can I add colorants to this resin?
Yes, specialized epoxy resin colorants can be added. Use them sparingly to avoid affecting the curing process. Test compatibility with your chosen colorant.
Is this resin safe to use indoors?
It is recommended to use this resin in a well-ventilated area due to potential fumes during the mixing and curing process. Ensure adequate airflow.
What is the best way to clean up uncured resin?
Uncured resin can be cleaned up using isopropyl alcohol. Once the resin has cured, it is much more difficult to remove.
Can I use this for food-related crafts?
No, this epoxy resin is not intended for direct food contact and should not be used in applications where it will be ingested.
How thick can I pour the resin at once?
Due to its low viscosity, it is best to pour in layers, especially for deep pours, to manage heat buildup and minimize bubbles. Check the manufacturer's recommendations for maximum pour depth.
Troubleshooting
Resin remains sticky or tacky after curing
This is usually due to incorrect mixing ratios or insufficient stirring. Ensure you measure accurately and stir thoroughly for the recommended time. Environmental factors like low temperature or high humidity can also affect curing. Try using a heating pad on a low setting to aid curing if ambient temperature is the issue.
Excessive bubbles in the cured resin
Ensure thorough mixing without whipping air into the resin. Allow the mixed resin to sit for a few minutes before pouring to let bubbles rise. Using a small torch or heat gun on a low setting, passed quickly over the surface after pouring, can help pop surface bubbles. Pouring in thin layers can also reduce bubble entrapment.
Resin cures cloudy instead of clear
This can happen if the resin is exposed to moisture during curing or if the mixing was incomplete. Ensure both parts are stored properly and the mixing process is thorough. Using distilled water for cleaning mixing tools can prevent mineral contamination.
Resin does not harden fully
Verify the mixing ratio is correct and that both components are within their shelf life. Ensure the ambient temperature is within the recommended range for curing. Incomplete mixing is the most common cause; stir longer and more thoroughly.
Pros and Cons
Pros
- Creates highly realistic water effects.
- Easy to mix and apply.
- Produces a durable, high-gloss finish.
- Low viscosity allows for excellent detail.
- Self-leveling for a smooth surface.
Cons
- Requires precise mixing ratios for best results.
- May produce fumes if not used in a well-ventilated area.
- Curing time needs to be factored into project planning.
- Not suitable for direct food contact.
Setup, Compatibility & Care
Setup:
- Ensure you are working in a well-ventilated area. Wear protective gloves and eyewear.
- Measure the two parts of the resin precisely according to the manufacturer's instructions (typically a 1:1 ratio by volume, but always check the product packaging).
- Combine the two parts in a clean mixing container.
- Stir thoroughly for 2-3 minutes, scraping the sides and bottom of the container to ensure complete mixing. Avoid whipping air into the mixture.
- Allow the mixture to sit for a minute or two to let bubbles rise.
- Pour the mixed resin carefully into your mold or desired area.
Compatibility:
- Compatible with most model paints, primers, and sculpting materials.
- Test on a small, inconspicuous area if unsure about compatibility with specific materials.
- Ensure surfaces are clean, dry, and free of dust or grease before application.
Care:
- Clean uncured resin spills immediately with isopropyl alcohol.
- Once cured, the resin is hard and can be cleaned with mild soap and water.
- Store in a cool, dry place away from direct sunlight and heat.
- Keep containers tightly sealed when not in use.