Shopping.co.uk

Aztec Oils Engine Oil - 10W-40

Not AvailableAztec Oils Engine Oil - 10W-40

TOROTEC SS 10W-40 is a high-quality semi-synthetic multigrade engine oil, formulated from a carefu...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later.

Product Information

Full details

The Aztec Oils TOROTEC SS 10W-40 is a semi-synthetic engine oil designed for drivers seeking reliable engine protection and performance across various conditions. Its key benefit is superior lubrication that minimizes wear and ensures smooth operation, especially during cold starts. A caveat to consider is that it meets specific OEM and industry standards, so always verify compatibility with your vehicle's manual before use.

All features

Model Part NumberSS 10W-40
BrandAztec Oils

Extended Product Information

FAQs

Is TOROTEC SS 10W-40 suitable for my diesel engine?

Yes, TOROTEC SS 10W-40 is API SN/CF rated, making it suitable for many diesel engines meeting these specifications. Always confirm with your vehicle's owner's manual.

What is the difference between semi-synthetic and fully synthetic oil?

Semi-synthetic oils are a blend of mineral and synthetic base oils, offering a balance of performance and cost. Fully synthetic oils are engineered for maximum performance, protection, and longevity, especially in extreme conditions.

How often should I change the oil?

The recommended oil change interval depends on your vehicle manufacturer's guidelines. Typically, it ranges from 5,000 to 10,000 miles, but severe driving conditions may require more frequent changes.

What does '10W-40' mean?

The '10W' indicates the oil's viscosity (thickness) at cold temperatures (W for Winter). The '40' indicates its viscosity at normal operating engine temperatures. A 10W-40 oil flows well when cold and maintains sufficient thickness when hot.

Can I mix this oil with other brands or types?

While not generally recommended, mixing oils of the same viscosity grade (10W-40) and type (e.g., semi-synthetic) from reputable brands is usually acceptable in a pinch. However, it can compromise the overall performance and protective properties. It's best to stick to one type and brand, and flush the system at the next oil change if mixing has occurred.

What is the pour point of this oil?

The pour point of TOROTEC SS 10W-40 is -32°C, indicating excellent fluidity at very low temperatures.

What is the TBN (Total Base Number)?

The Total Base Number (TBN) of TOROTEC SS 10W-40 is 10.3 mg KOH/g. A higher TBN indicates a greater reserve of alkalinity, which helps neutralize acidic byproducts of combustion and extend the oil's service life.

Troubleshooting

Engine making unusual noises

This could indicate insufficient lubrication. Check the oil level and condition. If the oil level is low, top up. If the oil is old or contaminated, schedule an oil change.

Oil warning light stays on

Immediately stop the engine and check the oil level. If the level is adequate, there may be an issue with the oil pressure sensor or pump. Consult a qualified mechanic.

Engine running rough, especially when cold

Ensure the correct oil viscosity and specifications are being used. The low-temperature fluidity of TOROTEC SS 10W-40 should aid cold starts, but if issues persist, check other engine components like spark plugs or air filter.

Excessive oil consumption

While some consumption is normal, excessive use could indicate worn engine components (piston rings, valve seals). Ensure the correct oil is being used; using an oil that is too thin for the engine's requirements can increase consumption.

Pros and Cons

Pros

  • Provides excellent protection against engine wear.
  • Ensures smooth engine operation, especially during cold starts.
  • Offers good resistance to oxidation and thermal breakdown.
  • Helps maintain engine cleanliness by preventing sludge and varnish.
  • Suitable for a wide range of modern engines meeting specified standards.

Cons

  • Being a semi-synthetic, it may not offer the absolute highest level of performance as a full synthetic in extreme conditions.
  • Requires verification of specific vehicle compatibility with its listed OEM approvals.
  • Older or specialized engines might require different oil specifications.

Setup, Compatibility & Care

Compatibility:

TOROTEC SS 10W-40 is designed for gasoline and diesel engines requiring oils that meet the following specifications:

  • ACEA: A3/B3, A3/B4
  • API: SN/CF
  • Mercedes-Benz: 229.1/229.3
  • Renault: RN0700/RN0710
  • VW: 502.00/505.00

Always consult your vehicle's owner's manual to confirm the recommended oil viscosity grade and specifications before use. Using the incorrect oil can lead to engine damage.

Care and Maintenance:

  • Oil Changes: Follow the manufacturer's recommended oil change interval, which can be found in your vehicle's owner's manual. Factors like driving conditions (frequent short trips, towing, extreme temperatures) may necessitate more frequent changes.
  • Checking Oil Level: Regularly check the engine oil level using the dipstick. Maintain the level between the minimum and maximum marks.
  • Disposal: Dispose of used engine oil responsibly at an authorized recycling center. Never pour used oil down drains or onto the ground.