Univolt Maxi Trunking - MAK50/50

This Univolt MAK50/50 is a 50 x 50mm Maxi Trunking Length. It is designed for organizing and prote...

Best current price£11.51from City Plumbing GB

One Offer

1 offer from £11.51

View price history by clicking the chart icon.

City Plumbing GBUnivolt Mak50/50 50 X 50Mm 3M Maxi Trunking Length Mak 50/50
Free delivery in 1–3 days
£11.51
Visit shop

Product Information

Full details

This guide is for anyone using the Univolt MAK50/50 Maxi Trunking to organize and protect cables in residential or commercial settings. The primary benefit is a tidy and secure cable management solution, but it's essential to plan your cable runs carefully to ensure sufficient capacity. This guide will help you understand the product, its features, and how to use it effectively.

All features

Model Part NumberMAK50/50
BrandUnivolt

Extended Product Information

FAQs

What tools do I need to install the trunking?

You'll typically need a measuring tape, saw (for cutting), screwdriver or drill (for fixings), and possibly cable ties or clamps.

Can I paint the trunking?

Yes, you can paint the trunking after installation if desired. Ensure the surface is clean and dry before applying paint.

What is the maximum cable capacity?

The maximum capacity depends on the size and number of cables. Always ensure that you do not exceed the trunking's internal capacity to prevent damage.

How do I make corners and bends?

Use pre-made corner pieces and bends, or cut the trunking at an angle for a custom fit. Ensure that cables are not bent too sharply.

Is the trunking fire-resistant?

The trunking offers protection, but confirm with the manufacturer specifications if fire resistance is a critical requirement in your application.

Where can I purchase accessories for the trunking?

Accessories, such as couplers and end caps, are typically available at the same retailers that sell the trunking.

Can I use the trunking outdoors?

The trunking can be used outdoors, but consider the potential for UV degradation, and ensure that the installation is weatherproof.

Troubleshooting

Trunking lid not staying closed.

Ensure the lid is properly aligned and clipped into place. Check for any obstructions or damage to the trunking or lid.

Cables are difficult to feed through the trunking.

Ensure there are no sharp bends or obstructions. Consider using cable lubricant to ease the process. If necessary, remove the lid to access the cables.

Trunking is not staying in place.

Check that the correct fixings are being used for the wall type. Ensure screws are properly tightened or adhesive has fully cured.

Pros and Cons

Pros

  • Provides a neat and professional appearance for cable management.
  • Protects cables from physical damage and environmental factors.
  • Easy to install with simple tools.
  • Helps to improve workplace or home safety by reducing trip hazards.
  • Available in lengths that can be cut to suit the need.

Cons

  • Requires careful planning to ensure adequate cable capacity.
  • Cutting may require specialized tools for a clean finish.
  • Limited flexibility once installed; changes require adjustments.
  • May require additional accessories such as couplers and bends.

Setup, Compatibility & Care

  1. Preparation: Measure and plan your cable runs to determine the required trunking length and any necessary bends or accessories.
  2. Cutting: Use a fine-tooth saw or a specialized cutting tool to cut the trunking to the required lengths.
  3. Installation: Secure the trunking to the wall or surface using appropriate fixings (screws or adhesive), ensuring it is level.
  4. Cable Routing: Carefully feed cables through the trunking, avoiding sharp bends.
  5. Closing: Snap the lid into place to secure the cables.

Compatibility: The MAK50/50 trunking is compatible with a wide range of cables, including electrical wires, network cables, and more. Always ensure the cables' combined diameter does not exceed the trunking's capacity.

Care: Regularly inspect the trunking for any damage or wear. Clean the trunking with a damp cloth and mild detergent if necessary. Avoid using abrasive cleaners.

Price History

DatePrice
Visit shop