Best current price£21.99from eBay
Shopping.co.uk recommended and popular offers
eBay£21.99Visit shop 4x Bartoline Filler Primer Quick Drying Plastic Metal Wood Adhesion Grey 400mL
Visit shop
B&Q£43.99Visit shop B&Q - 4X Filler Primer Quick Drying Plastic Metal Wood Adhesion Grey 400Ml
Visit shop3 offers from £21.99 - £43.99
View price history by clicking the chart icon.
The Bartoline Filler Primer is an essential tool for DIY enthusiasts and professionals seeking a flawless finish on metal, wood, and rigid plastic surfaces. By effectively smoothing out minor surface imperfections, it creates a superior base layer that ensures excellent topcoat adhesion and a professional aesthetic. While it offers rapid drying times and versatile application, it must be used exclusively in well-ventilated areas or outdoors due to the nature of the spray formulation.
| Colour | Grey |
|---|---|
| Model Part Number | PP8164 |
| Brand | Bartoline |
Yes, this primer is formulated to adhere to rigid plastic surfaces.
Apply the coats in 15-20 minute intervals, then allow 24 hours for the primer to fully harden before performing a final sand.
No, you should not use this product in direct sunlight as it may affect the curing and finish quality.
This is often caused by inconsistent shaking of the can or uneven spray distance. Shake for 2 minutes before use and maintain a consistent 15-25cm distance.
It is strongly recommended to use this only outdoors or in a very well-ventilated area due to the aerosol fumes.
Ensure you clear the nozzle by inverting the can and spraying for 2-5 seconds after each use; if already blocked, try soaking the nozzle in a suitable solvent.
You are likely holding the can too close to the surface or applying the layer too thickly. Maintain a distance of 15-25cm and apply thinner coats.
Check the ambient temperature; if it is below 15C or above 25C, the drying process will be negatively impacted. Move to a controlled environment.
To ensure optimal performance, start by preparing the target surface so it is completely clean, dry, and free of any grease, oil, or loose debris. Shake the canister vigorously for at least two minutes before starting, and remember to shake it occasionally during the spraying process to keep the contents mixed.
