Best current price£10.10from B&Q
Shopping.co.uk recommended and popular offers
B&Q£10.10Visit shop B&Q - Phillips Bugle Carbon Steel Plasterboard Screw (Dia)4.8mm (L)110mmPack Of 200
Visit shop1 offer from £10.10
View price history by clicking the chart icon.
This guide is designed for DIY enthusiasts and professionals seeking detailed information on the Diall Fine Metal & Wood Plasterboard Screws. These screws offer a reliable solution for securing plasterboard to metal and wood, with the caveat that proper pre-drilling may be required for certain applications. This guide covers key features, usage instructions, troubleshooting tips, and frequently asked questions to help you effectively utilize these screws in your projects.
| Colour | Black |
|---|---|
| Brand | Diall |
Use a drill bit slightly smaller than the diameter of the screw. A good starting point is approximately 3.5mm.
While the black phosphate coating offers some corrosion resistance, these screws are best suited for interior use. For exterior applications, consider screws specifically designed for outdoor environments.
You will need a Phillips head screwdriver bit.
A common spacing is approximately 6-8 inches along the studs, but always consult the manufacturer's recommendations for your plasterboard.
Avoid over-tightening the screws. The head should be flush with the surface. Consider using a drill with a clutch setting to prevent over-driving.
These screws are best suited for attaching plasterboard to metal and wood studs.
Reduce the drill speed and apply steady pressure. Consider pre-drilling a pilot hole.
Adjust the drill's clutch setting to prevent over-driving. If necessary, countersink the hole slightly.
Ensure the drill bit is the correct size and type. Forcing the screw can cause it to bend or break. Check for obstructions.
Ensure you are using the correct screw size for the metal's thickness. Increase drill pressure and/or use a slightly larger screw if necessary.
