Boiled Linseed Oil is especially suitable for use on soft wood garden furniture. The oil protects ...Boiled Linseed Oil is especially suitable for use on soft wood garden furniture. The oil protects wood from drying out after long periods in the sun and gives it a natural sheen that lasts. Boiled Linseed Oil contains additives to speed up the drying process. Hardwoods such as Oak and Teak should be treated with Teak Oil.
Preparation:
Ensure that the surface to be treated is clean and dry. Remove any paint or stain with sandpaper. Wipe the surface with a cloth dampened with White Spirit to remove any grease or dirt. Treat any mildew etc. with Fungicidal Wash.
Application:
Apply Boiled Linseed Oil liberally using a clean cloth or brush and rub in well, remove excess. For best results apply 2 or 3 coats allowing 24 hours between coats.
After Care:
Soiled application cloths should not be left where they may constitute a fire hazard as they can be liable to self-igniting without warning. Immediately after use, wash all cloths with soapy water and dispose of safely outside. Clean equipment with White Spirit.
This guide is for homeowners and DIY enthusiasts looking to protect and enhance softwood garden furniture. Bartoline Boiled Linseed Oil offers excellent protection against drying out and imparts a natural sheen, thanks to its quick-drying additives. However, it is not suitable for hardwoods like Oak or Teak, which require different treatments.
All features
Model Part Number
BL5360
Brand
Bartoline
Extended Product Information
FAQs
What type of wood is Bartoline Boiled Linseed Oil best for?
It is especially suitable for use on softwood garden furniture.
Can I use this on Oak or Teak furniture?
No, Oak and Teak are hardwoods and should be treated with a dedicated Teak Oil. This product is formulated for softwoods.
How many coats should I apply?
For best results, we recommend applying 2 to 3 coats.
How long should I wait between coats?
Allow at least 24 hours between each coat for proper drying.
How do I prepare the wood before applying the oil?
The surface must be clean and dry. Remove old paint/stain with sandpaper, wipe with White Spirit to remove grease, and treat mildew with Fungicidal Wash if necessary.
What should I do with the cloths after use?
Soiled application cloths are a fire hazard. Immediately wash them with soapy water and dispose of them safely outdoors.
How do I clean my equipment after use?
Clean brushes and other equipment with White Spirit.
Troubleshooting
Wood still looks dry after application
Ensure the oil was applied liberally and rubbed in well. The wood may require an additional coat, allowing adequate drying time between applications.
Surface remains sticky or tacky
Excess oil may not have been removed properly after application. Gently buff the surface with a clean cloth. Ensure sufficient drying time has passed.
Oil is not drying within 24 hours
Ensure the application area has good ventilation and is not too cold or humid. Check that only Boiled Linseed Oil was used, as raw linseed oil dries much slower.
Cloth used for application is a fire hazard
Immediately wash all used cloths with soapy water and dispose of them outdoors, away from any flammable materials, to prevent spontaneous combustion.
Pros and Cons
Pros
Effectively protects softwood from sun damage and drying.
Enhances wood with a natural, lasting sheen.
Dries faster than raw linseed oil due to added accelerators.
Easy to apply with simple tools.
Suitable for a range of softwood garden items.
Cons
Not suitable for hardwoods like Oak and Teak.
Requires careful handling of used cloths due to self-ignition risk.
Application involves multiple steps and drying times between coats.
Requires thorough surface preparation for best results.
Setup, Compatibility & Care
Preparation:
Ensure the wood surface is clean and dry.
Remove old paint or stain using sandpaper.
Wipe the surface with a cloth dampened with White Spirit to remove grease and dirt.
Treat any mildew with a suitable Fungicidal Wash.
Application:
Apply the Boiled Linseed Oil liberally using a clean cloth or brush.
Rub the oil in well to ensure penetration.
Remove any excess oil that has not been absorbed.
For optimal results, apply 2-3 coats, allowing 24 hours of drying time between each application.
Care & Cleaning:
Equipment: Clean brushes and tools immediately after use with White Spirit.
Safety: Soiled application cloths can self-ignite. Immediately after use, wash all cloths thoroughly with soapy water and dispose of them safely outdoors.
Compatibility:
Suitable for: Softwood garden furniture.
Not suitable for: Hardwoods such as Oak and Teak. These woods should be treated with a dedicated Teak Oil.