Best current price£259.99from eBay
Shopping.co.uk recommended and popular offers
eBay£259.99Visit shop Makita DHR280Z 18V/36V LXT Brushless 28mm SDS Plus Rotary Hammer Drill Body Only
Visit shop
B&Q£268.99Visit shop B&Q - Dhr280Z 18V/36V Lxt Cordless Brushless 28mm Sds Plus Rotary Hammer Drill Body Only
Visit shop2 offers from £259.99 - £268.99
View price history by clicking the chart icon.
The Makita DHR280Z is a high-performance cordless rotary hammer designed for professional contractors and serious DIY enthusiasts who require heavy-duty drilling and chiseling capabilities. Powered by an 18V Li-Ion battery, it delivers a potent 2.8 J of impact energy and utilizes a brushless motor for extended runtime and efficiency; however, users should note that the battery and charger are typically sold separately as part of the body-only (Z) model configuration.
| Model Part Number | DHR280Z |
|---|---|
| Brand | Makita |
No, this tool uses an SDS-Plus chuck system. You must use SDS-Plus compatible bits for hammer drilling and chiseling.
No, the DHR280Z model is a 'body-only' tool, meaning batteries and chargers must be purchased separately.
The maximum drilling diameter for concrete is 2.8 cm.
Yes, it features a dedicated chiseling mode that allows for light demolition tasks like tile removal.
Keep the tool clean of excess mud and debris. While XPT offers superior protection, it is not waterproof; avoid submerging the tool.
Yes, the DHR280Z is compatible with the standard Makita 18V LXT battery lineup.
Check if the battery is fully charged and correctly seated in the terminal. Verify that the direction switch is not in the neutral lock position.
Switch the tool into reverse mode and gently back the bit out. Do not force the tool if it binds to avoid motor strain.
Verify that the mode selector is firmly set to hammer mode. Ensure you are applying consistent, firm pressure to the tool while drilling.
To begin, ensure you have a compatible Makita 18V LXT Lithium-Ion battery fully charged. Insert the battery until it clicks securely into place. When selecting bits, ensure they are SDS-Plus compatible; push the bit into the chuck until you hear a click. To remove, pull back the chuck collar and slide the bit out. Always keep the ventilation slots clean from dust buildup using compressed air. Periodically grease the shank of your SDS bits before insertion to minimize wear on the tool's internal hammering mechanism. Store the tool in a dry, temperate environment to protect the electronic components.
