Best current price£38.30from eBay
Shopping.co.uk recommended and popular offers
eBay£38.30Visit shop U-Pol Dolphin Deep Car Body Filler 3L Stopper Repair Ultra Fine Finish Upol
Visit shop2 offers from £38.30 - £41.86
View price history by clicking the chart icon.
The U-Pol Dolphin Premium Body Filler is designed for both professional automotive technicians and DIY enthusiasts looking for a reliable solution for deep car body repairs. Its standout benefit is an ultra-fine, non-sagging formulation that allows for precise filling and a remarkably smooth finish, significantly reducing sanding time. While it offers superior workability, users should be aware that it requires precise mixing with the included hardener to ensure proper curing and long-term durability.
| Model Part Number | Premium Filling Properties Ultra Fine Formulation |
|---|---|
| Brand | U-Pol |
This filler is designed primarily for metal body panels. For plastic repairs, it is recommended to use a filler specifically formulated for flexible substrates.
Yes, the product includes the necessary hardener to initiate the curing process.
You should wait until the filler is fully cured and sanded smooth. Once a primer is applied over the filler, follow the paint manufacturer's drying times.
Once fully cured and properly primed/painted, the repair is moisture-resistant. However, it should not be left exposed to the elements in its raw filler state.
It is best practice to sand down to the bare metal or a well-adhered primer surface for the best possible long-term results.
Ensure the correct ratio of hardener was used and that the ambient temperature is above 15°C.
The filler likely had improper mixing or was applied in conditions with too high humidity. Remove the layer and re-apply.
Ensure the filler is applied using firm pressure to force air out of the material during the initial application.
To prepare the filler, mix it on a clean non-porous mixing board using a plastic spreader. Always follow the manufacturer's ratio for the hardener; over-mixing can cause the filler to cure too quickly, while under-mixing may result in a tacky, unusable surface. After application, allow the product to fully cure before sanding. Store the container in a cool, dry place with the lid tightly sealed to prevent the product from hardening or drying out in the can. Always use personal protective equipment (PPE) such as a mask and gloves, as the filler contains chemical compounds.
