Best current price£10.99from Debenhams
Shopping.co.uk recommended and popular offers
Debenhams£10.99Visit shop Electrovision Unisex Metallic Silver Xlr Male To 6.35Mm Mono Socket In
Visit shop1 offer from £10.99
View price history by clicking the chart icon.
The Electrovision 3 Pin XLR Male to 6.35 mm Mono Socket Adaptor is an essential tool for audio technicians and musicians who need to interface professional balanced microphone cables with standard mono jack inputs on mixing consoles, amplifiers, or sound processors. It is ideal for lightweight sound assemblies where space and portability are priorities, though users should note that this specific model performs a conversion to a mono signal, which may affect stereo imaging if used incorrectly in a balanced signal chain.
| Colour | Silver |
|---|---|
| Model Part Number | F346N |
| Brand | Electrovision |
This is a passive mechanical adaptor; while it physically passes the signal, it is not recommended to use it for devices requiring phantom power unless your specific input jack is designed to supply it through the jack port.
No, this is a mono adaptor. If you connect a stereo signal, you will likely lose one of the channels or experience phase issues.
It is designed for standard 6.35 mm mono jacks; however, be aware of impedance mismatches when plugging low-impedance microphones into high-impedance instrument inputs.
Use a short patch cable between the adaptor and the mixer if the weight of the cable is pulling on the jack, and always unplug by gripping the housing, not the cable.
The silver finish is durable but may show minor surface scratches over time with heavy professional use.
Verify that the XLR cable is fully seated and that the mono jack input on the mixer is active and unmuted.
Ensure both connection points are clean and that the adaptor is not being physically strained by a heavy, hanging cable.
To set up, simply insert your 3-pin XLR microphone cable into the male end of the adaptor until it clicks firmly into place. Then, insert the 6.35 mm end into your target jack input. Ensure that the device receiving the signal is set to mono mode to prevent potential phase cancellation issues. For care, avoid bending the adaptor while it is plugged into a port to prevent leverage damage to the jack. Store the unit in a dry environment and keep the metallic pins free of debris by occasionally wiping them with a clean, dry lint-free cloth.
