Best current price£11.97from B&Q
Shopping.co.uk recommended and popular offers
B&Q£11.97Visit shop B&Q - Marble Romeo Grey 67.5Cm X 1M Self-Adhesive Vinyl Wrap For Doors And Worktops
Visit shop2 offers from £11.97 - £12.49
View price history by clicking the chart icon.
This D-C-Fix Vinyl Wrap Film in Marble Romeo Grey is designed for DIY enthusiasts and renters looking to quickly and affordably update surfaces like worktops, kitchen doors, drawer fronts, or wardrobe doors. Its key benefit is providing a realistic, authentic marble look without the cost or permanence of real materials. A potential caveat is that while removable, it may leave minor residue if not heated sufficiently during removal. Key features include its realistic design, easy repositioning adhesive, and durable, lightfast finish.
| Model Part Number | 5056525329237 |
|---|---|
| Brand | d-c-fix |
While the vinyl has good durability, it is not designed for direct contact with high heat sources. Avoid placing hot pans directly on the surface; always use trivets or heat pads.
With proper application and care, the D-C-Fix vinyl can last for several years. Its 5-star rating for durability and lightfastness indicates good longevity under normal household conditions.
The vinyl itself is water-resistant, making it suitable for kitchens and bathrooms. However, ensure all edges are sealed properly to prevent moisture from getting underneath.
It is best applied over smooth, non-porous surfaces. Applying over wallpaper might result in poor adhesion or damage to the wallpaper upon removal, especially if the wallpaper is textured or peeling.
You will typically need a sharp craft knife or utility knife, a squeegee or old credit card for smoothing, and a measuring tape. A hairdryer can be helpful for application and removal.
It is not recommended to paint or varnish over the vinyl wrap, as this can affect its finish, texture, and removability.
Clean using a soft cloth dampened with water and a mild detergent. Rinse with clean water and dry with a soft cloth. Avoid harsh chemicals or abrasive scrubbers.
Gently peel back the affected section of the vinyl and reapply, using a squeegee or card to smooth it out from the center outwards. If the vinyl is sticking too much, try warming it slightly with a hairdryer on a low setting.
Ensure the surface is thoroughly cleaned and completely dry. Check if the surface is too porous or rough. For better adhesion on some surfaces, a light sanding and priming might be necessary before application.
Use a hairdryer on a medium heat setting to warm the vinyl thoroughly before peeling. This softens the adhesive. Peel slowly and gently. Any remaining residue can typically be removed with warm, soapy water and a soft cloth.
Carefully overlap the pieces according to the pattern's design. Some vinyl wraps have a specific overlap guide or pattern repeat that needs to be matched. Measure precisely and cut accurately.
Setup: Ensure the surface to be covered is clean, dry, and smooth. Remove any dust, grease, or old adhesive. Cut the vinyl wrap to the desired size, leaving a small overlap. Peel back a small section of the backing paper and carefully align the vinyl. Slowly peel off the backing paper while smoothing the vinyl onto the surface using a squeegee or credit card, working from the center outwards to avoid air bubbles. Trim any excess material with a sharp craft knife.
Compatibility: Best suited for smooth, non-porous surfaces such as laminate, metal, painted wood, glass, and finished particle board. Avoid applying to rough, uneven, or unsealed surfaces.
Care: Clean the surface regularly with a damp cloth and mild soapy water. Avoid abrasive cleaners or scouring pads, as these can damage the finish. For stubborn marks, use a soft sponge. Do not use solvents for cleaning.
