Best current price£11.03from B&Q
Shopping.co.uk recommended and popular offers
B&Q£11.03Visit shop B&Q - Clever Little Box6.35mm Jack Stereo Plug To 3X Terminal Block Adaptor
Visit shop2 offers from £11.03
View price history by clicking the chart icon.
The Clever Little Box CLB-JL-8105 is designed for audio professionals and system installers who need a reliable, solder-free solution to bridge professional 6.35mm (1/4-inch) stereo equipment with bare-wire terminal block connections. This adaptor offers a robust way to interface custom audio cabling in permanent installations, though it is specifically intended for technical environments requiring manual wire termination rather than quick-swapping applications.
| Model Part Number | CLB-JL-8105 |
|---|---|
| Brand | CIE Europe |
Yes, because the adaptor features 3 contacts, it can accommodate the positive, negative, and ground signals found in balanced 6.35mm stereo audio applications.
The terminal blocks are designed for standard low-voltage audio signal wire, typically ranging from 22 AWG to 26 AWG.
Yes, the screw-down terminal blocks can be opened and rewired multiple times if your installation requirements change.
While it fits, it is primarily designed for permanent installation work rather than live performance, as the terminal block is not as strain-relieved as a molded connector.
The contacts are engineered for high-conductivity metal to ensure a stable signal path for professional audio equipment.
Check that the wires are fully inserted and secured in the terminal block and that there is no insulation trapped under the screw terminals.
Ensure that the ground wire is correctly connected to the sleeve terminal and that all screws are tightened to prevent loose connections.
Verify that the tip, ring, and sleeve wires are not touching each other and are wired to the correct contact points on the block.
To install, strip approximately 5mm of insulation from your signal wires and insert them into the appropriate slots on the terminal block, ensuring that the ground, left, and right signals correspond correctly to the tip, ring, and sleeve. Use a precision screwdriver to tighten the terminal screws, ensuring the wire is firmly clamped. For care, keep the jack plug clean of dust and oxidation by using a standard contact cleaner if necessary. Avoid exposing the terminal blocks to moisture, as corrosion can affect the conductivity of the screw contacts.
