Hasegawa Yanmar Tractor YT5113A Delta Specification Plastic Model - 1/35 Scale

This model kit is manufactured in a 1/35 scale.

The completed model will measure approximately 167mm in length and 77mm in width.

No, adhesive, tools, and paints are sold separately and are required to complete the model.

The included male operator figure has been prototyped by Satoshi Tsujimura.

This model represents the Yanmar YT5113A tractor with a special delta crawler specification, falling under the construction machinery/agriculture category.

This kit is recommended for intermediate to advanced modelers due to the assembly and painting requirements. Beginners may find it challenging without prior modeling experience.

Ensure you have removed all excess plastic (flash) from the parts. Check the instruction manual to confirm you are using the correct parts and orientation.

Use plastic cement sparingly and try to apply it directly to the joining surfaces. If visible glue is an issue, consider painting the model after assembly or touching up affected areas.

Ensure surfaces are clean and free of grease before painting. Apply a primer specifically designed for plastic models. Allow adequate drying time for both primer and paint coats.