Best current price£31.50from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£31.50Visit shop Eaton 029364 T0-1 Changeover switch 1-pole housing 1pc
Visit shop15 offers from £31.50 - £110.75
View price history by clicking the chart icon.
This Eaton Moeller Series T0 changeover switch is designed for industrial applications requiring reliable power source switching. Its key benefit is robust 690V AC, 20A operation with a clear 4-step control, including an off position. A potential caveat is its surface mount design, requiring specific installation considerations. The switch features a 3-position toggle actuator, NO/NC normal state configuration, and IP65 front protection.
| Series | T0 |
|---|---|
| Model Part Number | 207095 |
| Brand | Eaton |
This Eaton changeover switch is rated for 690V AC and 20A.
It features a 3-position toggle actuator with a 45° angle.
NO/NC stands for Normally Open/Normally Closed. This indicates the state of the switch contacts when it is not activated, providing flexibility in circuit design.
The front of the switch offers an IP65 degree of protection, meaning it is protected against dust ingress and low-pressure water jets.
The dimensions of the switch are 137mm (height) x 80mm (width) x 137mm (depth).
Yes, this switch has a 4-step control that includes a dedicated 'off' position.
It utilizes screw terminals for secure electrical connections.
Verify power is disconnected. Check for any mechanical obstructions. Ensure internal contacts are properly seated and wired. Consult the product manual for internal diagnostics if applicable.
Check the tightness of all screw terminal connections. Inspect contacts for wear or contamination and clean if necessary. Ensure the actuator is moving fully through its intended positions.
Verify that the connected load does not exceed the switch's 20A rating. Ensure all connections are tight, as loose connections can cause resistance and heat. Confirm adequate ventilation around the switch if installed within an enclosure.
Setup:
Compatibility:
This switch is designed for AC circuits within its 690V AC and 20A rating. It is compatible with standard electrical enclosures and control systems that accommodate its physical dimensions and mounting type. Ensure the surrounding environment does not exceed the IP65 protection limits for the front face.
Care:
