Best current price£7.95from eBay
Shopping.co.uk recommended and popular offers
eBay£7.95Visit shop Varilight XDV1S Screwless Polished Brass 1 Gang 1 or 2 Way Rocker Light Switch
Visit shop
The Range£10.97Visit shop Varilight Flat Plate Screwless Polished Brass 1-Gang Light Switch Xdv1s - Polished Brass
Visit shop7 offers from £7.95 - £18.03
View price history by clicking the chart icon.
The Varilight Intermediate Light Switch (XDV7S_AMZ) is designed for electricians and DIY enthusiasts needing advanced lighting control, specifically for enabling 3-way switching setups. Its key benefit is providing flexible control over lighting circuits from multiple locations, with a sleek, screwless polished brass faceplate that complements modern interiors. A potential caveat is that intermediate switching requires careful wiring and may be more complex than standard single-pole switches.
| Model Part Number | XDV7S_AMZ |
|---|---|
| Brand | Varilight |
An intermediate switch is used in lighting circuits to provide control from three or more locations. It is wired in conjunction with two 2-way switches to create a 3-way switching system.
While technically possible to wire it as a 2-way switch, its primary purpose and design are for intermediate (3-way) switching. Using it in a simple 2-way setup would not utilize its advanced functionality.
This switch is rated for 10 Amperes (10A), which is suitable for most standard mains voltage lighting circuits.
No, this product is the switch and faceplate only. It is designed to fit into a standard UK single-gang electrical backbox, which is typically purchased separately or is already present in the wall.
Gently wipe with a soft, dry cloth. For light cleaning, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners.
Yes, the screwless faceplate can usually be gently pried off to allow access to the switch mechanism for wiring or replacement, but care should be taken not to damage the plate or wall finish.
Verify all wiring connections are secure and correct according to the intermediate switching diagram. Ensure you have two 2-way switches and two intermediate switches wired in series for 3-way control.
Check that the mounting screws securing the switch mechanism to the backbox are tightened appropriately. Ensure the backbox itself is securely fixed to the wall.
Ensure the backbox is correctly recessed into the wall and that no cables are obstructing the plate. Check for any debris trapped between the wall and the switch mechanism.
Setup: This switch is designed to replace existing intermediate switches or be installed in new wiring systems. It requires connection to specific wiring configurations for 3-way switching. Always ensure the power is completely isolated at the mains before commencing any electrical work. Refer to wiring diagrams for intermediate switches to ensure correct connections. The switch fits into standard UK single-gang backboxes; ensure adequate depth for wiring.
Compatibility: Suitable for controlling mains voltage lighting and low voltage lighting circuits. Compatible with standard UK electrical wiring systems.
Care: To maintain the polished brass finish, clean the faceplate with a soft, dry or slightly damp cloth. Avoid abrasive cleaners or solvents, as these can damage the finish. For stubborn marks, use a mild detergent solution and wipe dry immediately.
