Best current price£11.97from B&Q
Shopping.co.uk recommended and popular offers
B&Q£11.97Visit shop B&Q - Whitewood 67.5Cm X 1M Self-Adhesive Vinyl Wrap For Doors And Worktops
Visit shop2 offers from £11.97 - £12.49
View price history by clicking the chart icon.
This d-c-fix Woodgrain Whitewood vinyl wrap is designed for DIY enthusiasts and renters looking to quickly and affordably update surfaces like countertops, kitchen doors, furniture, and wardrobes. Its key benefit is the ability to achieve a new look without the cost and effort of replacement, with a special water-based adhesive that allows for repositioning during application. A minor caveat is that while generally removable, using a hairdryer to warm the vinyl is recommended for easier removal and residue cleanup.
| Model Part Number | 900040735830 |
|---|---|
| Brand | d-c-fix |
Yes, this vinyl wrap can be used on kitchen countertops, especially those with a smooth, non-porous surface like laminate. Ensure the surface is thoroughly cleaned and dried before application. For best results, avoid placing extremely hot pots directly on the vinyl.
This vinyl wrap is designed for indoor use. Prolonged exposure to UV rays and weather conditions can cause fading and damage, affecting its appearance and adhesion.
With proper application and care, the d-c-fix vinyl wrap is rated 5 stars for durability and lightfastness, suggesting it can last for several years under normal indoor conditions.
Yes, the water-based, low-tack adhesive allows you to reposition the vinyl during application. Simply peel it back gently and reapply.
For best results, you will need a sharp craft knife or scissors for cutting, a squeegee or a credit card for smoothing, and a hairdryer for warming edges and corners.
Generally, it can be removed without damage, especially from properly cured and smooth paint. Warming the vinyl with a hairdryer can help. However, on older or less durable paint finishes, some minor damage or residue may occur. Test in an inconspicuous area first if concerned.
While not ideal for a seamless look, you can overlap pieces if necessary. However, it's best to aim for edge-to-edge application or use a very slight overlap to minimize visibility.
Gently lift the affected section of the vinyl and reapply, using a squeegee to smooth out any trapped air. For stubborn bubbles, you can prick them with a fine needle and then smooth them down.
Ensure the surface is clean, dry, and free from dust or grease. If the adhesive feels weak, try warming the vinyl slightly with a hairdryer to reactivate it.
Use a hairdryer on a medium heat setting to warm the vinyl. This will soften the adhesive, making it easier to peel back slowly and carefully.
Gently rub the residue with a cloth dampened with warm, soapy water. For tougher residue, a specialized adhesive remover or rubbing alcohol can be used cautiously, testing in an inconspicuous area first.
Setup: Ensure the surface you wish to cover is clean, dry, and smooth. Measure and cut the vinyl wrap to size, allowing for a slight overlap. Peel back a small portion of the backing paper and carefully align the vinyl to the edge of the surface. Slowly peel away the backing paper while smoothing the vinyl onto the surface using a squeegee or credit card to push out air bubbles. For corners and edges, you may need to warm the vinyl slightly with a hairdryer to make it more pliable for a cleaner finish.
Compatibility: This vinyl is best applied to smooth, non-porous surfaces such as laminate, painted wood (ensure paint is fully cured and smooth), metal, and glass. Avoid applying to rough, unpainted wood, textured walls, or surfaces that are very damp or excessively hot.
Care: Clean the applied vinyl with a soft, damp cloth and mild soapy water. Avoid abrasive cleaners or scouring pads, as these can scratch the surface. For stubborn marks, a gentle solution of warm soapy water should suffice. Avoid prolonged exposure to high heat or direct sunlight, which can affect the adhesive and material over time.
