Pro Power - Twin & Earth Cable Clips - 4mm - Grey
Best current price£7.34from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£7.34Visit shop B&Q - Pro PowerTwin & Earth Cable Clips4mmGreyPack Of 100
Visit shopB&Q£7.34Visit shop All Offers
2 offers from £7.34
View price history by clicking the chart icon.
B&QB&Q - Pro PowerTwin & Earth Cable Clips4mmGreyPack Of 100
Free delivery in 1–3 days
£7.34
Visit shop
OnBuy.comPro Power - Twin & Earth Cable Clips, 4Mm, Grey, Pack Of 100 3561034132763
Free delivery in 1–3 days
£7.34
Visit shop
Product Information
Full details
The Pro Power Twin & Earth Cable Clips are essential for electricians, DIY enthusiasts, and home renovators looking to secure 4mm electrical cabling firmly against surfaces. These clips provide a robust and tidy mounting solution for routing cables along wood, masonry, or compressed board, ensuring your installation remains organized and compliant; however, users should be cautious to use an appropriate masonry drill bit for pilot holes when working with harder surfaces to prevent surface damage.
All features
| Colour | Grey |
|---|---|
| Brand | Pro Power |
Extended Product Information
FAQs
Can I use these clips for outdoor wiring?
These clips are intended for general use; if installing outdoors, ensure they are in a protected area away from direct, long-term UV exposure.
Are the nails included with the clips?
Yes, every clip is supplied with its own hardened steel nail.
Will these clips damage the cable sheath?
When installed correctly, the 4mm sizing provides a snug fit that holds the cable securely without piercing or compromising the outer insulation.
Can these be painted?
Yes, the polypropylene material will accept most standard paints if you need to match a specific wall colour.
What is the recommended spacing between clips?
For most standard horizontal runs, spacing the clips every 30 to 50 centimeters is recommended to prevent cable sag.
Troubleshooting
Nail bends while driving into masonry
Ensure you are using a pilot hole if the masonry is extremely dense or reinforced.
Clip snaps during installation
Check that the cable is properly centered in the clip and avoid striking the plastic body directly with the hammer.
Clip feels loose after installation
The surface material may be too soft; try a slightly longer masonry nail or relocate the clip to a more solid portion of the substrate.
Pros and Cons
Pros
- High-quality polypropylene prevents snapping under pressure
- Hardened steel nails drive easily into multiple material types
- Low-profile grey finish minimizes visual clutter
- Excellent elasticity allows for slight tension adjustments
Cons
- Requires manual hammer installation which can be tiring for large projects
- Not suitable for use on hollow-core surfaces without appropriate backing
- Internal diameter is fixed to 4mm and will not fit larger gauge cables
Setup, Compatibility & Care
For installation, ensure you are using a standard claw hammer or a light mallet. To install on wood, place the cable in position, set the clip, and drive the steel nail flush with the clip body. When working on masonry or compressed board, it is highly recommended to mark your spacing first; if the material is particularly brittle, use a small pilot hole to avoid cracking the wall surface. To maintain the integrity of the installation, keep the clips away from high-heat sources that could cause the polypropylene to soften over time. These clips are intended for indoor or protected outdoor use and should be inspected periodically during routine home maintenance.