Best current price£9.90from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£9.90Visit shop Orac Decor Px201 Axxent Panel Moulding Decorative Moulding Stucco Moulding 2 M 5414433024703
Visit shop1 offer from £9.90
View price history by clicking the chart icon.
The Orac Decor PX201 AXXENT Panel Moulding is designed for homeowners and renovators seeking to add a timeless, classic touch to their interior or exterior spaces. Its key benefit is its versatility and durable Duropolymer® material, which is lightweight, shockproof, and dimensionally stable, allowing for easy installation and a long-lasting finish. A potential caveat is that it requires painting for UV resistance and a finished aesthetic.
| Colour | White |
|---|---|
| Series | AXXENT |
| Model Part Number | 5414433024703 |
| Brand | Orac |
No, the Orac Decor PX201 AXXENT Panel Moulding is made from Duropolymer® which is rigid and not flexible. It is not suitable for applications on curved surfaces.
Yes, this moulding is suitable for outdoor use. However, it must be finished with a suitable exterior paint for adequate UV resistance and durability against weather elements.
You can use any water-based acrylic paint, acrylic varnish, or premium interior paint. For outdoor use, an exterior-grade paint is required.
The approximate adhesive consumption is 88 ml per 200 cm length of moulding. It is recommended to use Orac Decor's specific Decofix adhesives.
The moulding measures 200 cm in length, 0.8 cm (8 mm) in width, and 2.5 cm (25 mm) in height.
Yes, it is suitable for use in damp rooms like bathrooms, provided it is properly sealed and finished with appropriate paint.
Duropolymer® is a high-density, extruded polystyrene material. It is known for being lightweight, dimensionally stable, and shockproof, offering excellent durability.
Ensure the wall surface is clean, dry, and free from dust or grease. Verify that the correct Decofix adhesive has been used for the environment (interior/exterior/damp) and applied generously. Ensure adequate pressure was applied during mounting and allow sufficient curing time.
Use a fine-toothed saw designed for cutting mouldings. Ensure the saw is sharp and use a mitre box or mitre saw for accurate angle cuts, especially for corners.
Ensure the moulding surface was clean and dry before painting. Verify that the primer was fully cured and that the paint used is compatible (water-based acrylic). For exterior use, ensure an appropriate exterior-grade paint was used.
Use DecoFix Ultra adhesive specifically designed for seam joints. Apply it evenly to both edges before pressing the pieces together. Sand lightly once cured if necessary, then repaint.
Setup:
Compatibility:
Care:
