StrataRise Spacer X - 10mm Width

The 'X' shape is designed to provide a consistent distance and alignment between four adjacent tiles, ensuring uniform grout lines, especially in linear patterns.

Consider the desired grout line width. The millimeter measurement on the spacer (e.g., 2 mm, 5 mm, 10 mm) corresponds directly to the width of the grout joint you will achieve.

While primarily designed for linear patterns, they can be adapted for some staggered layouts. For highly irregular patterns, other types of spacers or leveling systems might be more appropriate.

StrataRise Spacer X are generally considered disposable for convenience. If you choose to reuse them, ensure they are thoroughly cleaned and dried.

They help maintain consistent spacing between tiles themselves. However, for uneven walls, you may need to adjust tile placement at the edges and use additional leveling tools.

The wide range of sizes allows installers to precisely plan their grout lines, match existing tile jobs, or select a size that minimizes the need for cutting tiles at the perimeter of the room.

For a standard installation, you place one spacer at each corner where tiles meet. In practice, you'll use multiple spacers per tile, especially at intersections with three or four other tiles.

Ensure spacers are fully seated and not obstructed by debris. Verify that the tiles themselves are not warped and that the substrate is level. Check that the correct spacer size was used for the desired grout width.

Use the correct spacer size for the gap. Avoid excessive force when placing tiles. Ensure the adhesive bed is not too thick, which can cause tiles to sit unevenly on the spacers.

Allow adequate drying time for the tile adhesive. If spacers are difficult to remove, gently pry them out with a thin tool or use pliers. Avoid removing them too early if the adhesive is still very wet.