Best current price£12.50from B&Q
Shopping.co.uk recommended and popular offers
B&Q£12.50Visit shop B&Q - Everbuild Instant Nails White Solvent Free Adhesive 290Ml 3 Pack
Visit shop1 offer from £12.50
View price history by clicking the chart icon.
Everbuild Instant Nails Adhesive is designed for DIY enthusiasts and trade professionals looking for a reliable, solvent-free bonding solution for interior and exterior projects. Its key benefit is the high-strength, quick-grab formula that replaces the need for traditional mechanical fixings, though users should note that while it is fast-acting, it requires a clean, dry surface to achieve the most durable, long-term bond.
| Colour | White |
|---|---|
| Model Part Number | 1420237 |
| Brand | Snowdon Timber Products Ltd |
Yes, Everbuild Instant Nails is suitable for both interior and exterior use, provided it is not in a position of permanent water immersion.
Yes, because it is solvent-free, it has a low odor and is safer to use in enclosed indoor spaces compared to solvent-based alternatives.
Yes, the adhesive dries to a white finish and is fully paintable once cured.
While the grab is instant, a full cure typically takes 24-48 hours depending on the temperature and porosity of the surfaces.
No, it is compatible with all standard 290ml-310ml sealant/caulking guns.
Yes, it is effective at bonding a wide variety of materials including wood, metal, plasterboard, and stone.
Ensure the surface is not damp, dusty, or greasy; check if the item is too heavy and requires temporary mechanical support during the curing process.
Check that the nozzle is cut wide enough and ensure the cartridge has not been exposed to freezing temperatures, which can thicken the formula.
Once fully cured, use a sharp scraper or knife to carefully remove the excess, then sand and paint the area as needed.
To achieve the best results, ensure all contact surfaces are dust-free, clean, and dry. Cut the tip of the cartridge at an angle to your desired bead width and use a standard sealant gun to apply. Press the two surfaces together firmly. If the items are heavy or under tension, use temporary support or clamps for the first 24 hours. For cleanup, wipe away excess adhesive immediately using a damp cloth before it sets. Keep the product stored in a cool, dry place and ensure the nozzle is sealed if storing for later use.
