CLIFF 6.35mm Stereo Solder Switched Jack Socket - CL1322A
Best current price£5.69from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£5.69Visit shop CLIFF 6.35mm Stereo Solder Switched Jack Socket S4/BBB CL1322A
Visit shopeBay£5.69Visit shop One Offer
1 offer from £5.69
View price history by clicking the chart icon.
eBayCLIFF 6.35mm Stereo Solder Switched Jack Socket S4/BBB CL1322A
Free delivery in 1–3 days
£5.69
Visit shop
Product Information
Full details
The CLIFF CL1322A 6.35mm stereo switched jack socket is designed for audio engineers, DIY instrument builders, and technicians who require a robust, panel-mounted connector for professional audio equipment. Its primary benefit is the integrated switching mechanism, which allows for versatile signal routing configurations, though it requires precise soldering skills and manual wiring to implement correctly in a chassis.
All features
| Model Part Number | CL1322A |
|---|---|
| Brand | Switch Electronics |
Extended Product Information
FAQs
Is this socket mono or stereo?
The CL1322A is a stereo (TRS) socket, meaning it features three connection points plus the switched contacts.
What size hole do I need to drill for this?
This component requires an 11.2mm panel cut-out.
Can this be used for power distribution?
Yes, with a 5A current rating and 2000V DC withstand, it can handle low-voltage power distribution, provided it is wired with appropriate cable gauges.
Does this include mounting screws?
The socket is designed to be panel-mounted via the integrated bezel and nut; no additional mounting screws are required.
Are the solder tags easy to work with?
The solder tags are designed for standard through-hole soldering, though using high-quality flux and pre-tinning your wires will ensure a reliable connection.
Troubleshooting
Intermittent audio signal when cable is inserted
Check that the solder joints on the tags are firm and that the internal spring contacts are making proper contact with the plug tip and ring.
Switched contact not changing signal state
Verify that your wiring configuration matches the switched lug layout of the socket and that the plug is fully seated to trigger the switch.
Loose socket in the panel
Tighten the mounting nut on the front of the bezel; if the nut loosens repeatedly, apply a small amount of non-permanent thread locker.
Pros and Cons
Pros
- High-quality metal bezel for durability
- Switched contacts allow for complex signal routing
- Robust 5A current rating
- Standard 11.2mm panel cut-out makes it easy to install in existing designs
Cons
- Requires manual soldering to secure connections
- No pre-attached cables or quick-connect terminals
- Not intended for tool-less installation
Setup, Compatibility & Care
To install the socket, ensure your enclosure panel has an 11.2mm circular cut-out. Insert the socket from the front of the panel and secure it using the provided hardware. When soldering, use a temperature-controlled iron to avoid overheating the contacts, as excessive heat can deform the internal plastic housing of the jack. Ensure your wire gauges are appropriate for the solder tags to prevent mechanical strain on the connections. Periodically clean the internal spring contacts with an electronics-grade contact cleaner if you notice intermittent audio signal after long-term use in dusty environments.