End Feed Equal Tee 28mm - PlumbRight - 78711
Best current price£4.69from City Plumbing GB
Best offers
Shopping.co.uk recommended and popular offers
City Plumbing GB£4.69Visit shop Plumbright Endfeed Equal Tee 28Mm 78711
Visit shopCity Plumbing GB£4.69Visit shop All Offers
2 offers from £4.69 - £5.05
View price history by clicking the chart icon.
Product Information
Full details
This guide is for plumbers and DIY enthusiasts working with domestic plumbing systems, specifically central heating and hot & cold water supplies. The PlumbRight End Feed Equal Tee 28mm fitting offers a cost-effective and reliable solution for joining copper pipes, especially in confined spaces due to its lightweight and compact design. A key consideration is the requirement for soldering skills and appropriate safety measures during installation.
All features
| Model Part Number | 78711 |
|---|---|
| Brand | PlumbRight |
Extended Product Information
FAQs
What size copper pipe does this fitting work with?
This is a 28mm End Feed Equal Tee, designed specifically for use with 28mm nominal bore copper pipe.
Can this fitting be used for gas pipes?
No, this fitting is designed for water systems (central heating, hot & cold water supplies) and is not suitable for gas installations.
What certifications does this fitting have?
The fitting has both Kitemark and WRAS certifications, indicating compliance with high industry standards for quality and safety.
Is this fitting suitable for push-fit plumbing systems?
No, this is an end feed fitting that requires soldering. It is not compatible with push-fit or compression plumbing systems.
What materials are required for installation?
You will need a blowtorch, solder wire, flux, emery cloth or pipe cleaning brush, and a means of safely extinguishing the flame. A pipe cutter may also be required.
How important is cleaning the pipe and fitting before soldering?
Cleaning is critical. Oxidation and dirt prevent the solder from adhering properly and creating a watertight seal. Both the pipe end and the inside of the fitting socket must be thoroughly cleaned.
Troubleshooting
Joint is not sealing (leaking)
Ensure thorough cleaning of pipe and fitting, adequate flux application, and sufficient heat applied evenly to the fitting to draw solder completely around the joint. Reheat and apply more solder if necessary.
Solder not flowing into the joint
The fitting may not be hot enough. Increase heat duration or intensity. Ensure solder is applied to the correct point where the pipe and fitting meet.
Fitting overheated or solder melting prematurely
Reduce the direct heat from the blowtorch. Use a heat-resistant mat to protect surrounding areas. Ensure the correct type of solder is being used.
Pros and Cons
Pros
- Durable construction from high-grade copper.
- Certified for quality and safety (WRAS & Kitemark).
- Compact size is perfect for restricted spaces.
- Versatile for various water supply applications.
- Economical installation method.
Cons
- Requires soldering skills and equipment.
- Installation involves heat and open flame, necessitating safety precautions.
- Not suitable for push-fit or compression plumbing systems.
Setup, Compatibility & Care
Setup:
- Ensure the copper pipe ends and the inside of the fitting sockets are clean and free from dirt or oxidation. Use emery cloth or a pipe cleaning brush for preparation.
- Apply a thin, even layer of appropriate flux to both the pipe ends and the inside of the fitting sockets.
- Insert the pipe fully into the fitting socket.
- Apply heat evenly to the underside of the fitting socket using a blowtorch. Avoid heating the pipe directly.
- Once the fitting is hot enough, touch the solder wire to the joint at the opposite side to where the heat is applied. The solder should be drawn into the gap between the pipe and the fitting.
- Allow the joint to cool undisturbed for several minutes before testing.
Compatibility:
- Compatible with 28mm copper pipe manufactured to relevant British Standards.
- Suitable for use in central heating systems, hot water, and cold water supplies.
- Requires soldering equipment (blowtorch, solder, flux).
Care:
- These fittings are typically installed and then left in place. No ongoing care is required for the fitting itself once installed.
- Periodically check the integrity of the overall plumbing system for any signs of leaks or wear.