Best current price£18.01from eBay
Shopping.co.uk recommended and popular offers
eBay£18.01Visit shop TREND PRO 3/22 6.3MM 1/4"" TCT STRAIGHT ROUTER CUTTER BIT 1/2"" SHANK
Visit shop
B&Q£54.51Visit shop B&Q - 3/22 X 1/2 Tct Two Flute Cutter 6.3 X 25mm
Visit shop14 offers from £18.01 - £62.12
View price history by clicking the chart icon.
The Trend TCT Two Flute Straight Router Cutter is an essential tool for professional woodworkers and DIY enthusiasts who require precision in abrasive materials like MDF, chipboard, and hardwood. Designed for stability and clean cutting, its two-flute configuration provides a superior edge finish for tasks ranging from grooving to hinge recessing, though users should be aware that it leaves rounded internal corners that require manual squaring.
| Model Part Number | 3/22X1/2TC |
|---|---|
| Brand | Trend |
No, this bit requires a 1/2 inch collet for safe and stable operation.
Yes, it is designed for hardwoods, as well as abrasive materials like chipboard and MDF.
All straight router bits leave a radius equal to their cutting radius; you will need to square off corners with a chisel.
Avoid cutting through nails or staples, keep the cutter clean from resin, and store it in a protective case.
It provides a much cleaner edge finish than a single-flute bit because the load is balanced across two edges.
Check that the collet is tightened securely and ensure the bit is not seated too far in or too far out of the router.
The feed rate may be too slow or the cutter may have resin buildup; clean the bit and increase your travel speed across the material.
Inspect the collet for wear or debris and clean both the shank and the collet thoroughly before reinstalling.
To ensure optimal performance, verify that your router is equipped with a 1/2 inch collet. When installing the cutter, ensure the shank is inserted at least two-thirds into the collet for maximum safety and stability. Do not bottom out the shank; leave a small gap of 2-3mm from the collet base to allow for proper tightening. Regularly inspect the tungsten carbide tips for resin buildup; clean using a dedicated resin remover to prevent friction-induced heat. Store the cutter in its protective case when not in use to prevent damage to the cutting edges.
