Draper Nozzle Kit For Pressure Washer - 14434

This nozzle kit is specifically designed for Draper Pressure Washer 14434 and also compatible with the Draper 53858 model. Always confirm your pressure washer's lance fitting.

Wider angle nozzles (e.g., 40-degree) are for general rinsing and cleaning large areas. Narrower angle nozzles (e.g., 15 or 0-degree) are for concentrated cleaning on tough, stubborn dirt. Refer to your pressure washer manual for specific recommendations.

This kit is designed for specific Draper models. While some fittings may appear similar, using it with incompatible pressure washers is not recommended and may void warranties or cause damage.

Rinse the nozzles with clean water after each use to remove dirt and debris. For stubborn blockages, you can gently use a soft brush or flush with water. Avoid using sharp metal objects.

The kit typically includes four distinct nozzles, each offering a different spray pattern and pressure for versatile cleaning applications.

It is best to store the nozzles in their original packaging or a small, compartmentalized container to keep them organized and prevent them from getting lost or damaged.

Verify that you are using the correct nozzle for the specified Draper pressure washer model (14434 or 53858) and that the lance fitting is compatible.

Check the nozzle for blockages. Rinse thoroughly with water. Ensure the nozzle is correctly seated in the lance.

Confirm the correct nozzle is selected for the task. Check for blockages in the nozzle or lance. Ensure the pressure washer itself is operating at full capacity and water supply is adequate.