Mirka Dust Extraction Handy Sander Kit - 80 x 230mm

The Mirka Handy Sander is designed for use with Abranet sanding strips. The kit includes a selection of grits, and additional grits can be purchased separately.

Attach the 20mm dust extraction hose to the sander and connect the other end to a compatible dust extraction machine. Ensure a secure connection to prevent dust leakage.

Simply remove the old Abranet sanding strip and replace it with a new one. The strips adhere to the sanding plate without the need for clamps.

The grit of sandpaper you should start with depends on the task. For heavy removal, use a coarser grit (e.g., 80 grit). For finer finishing, use a finer grit (e.g., 180 grit).

After use, wipe down the sanding plate and the body of the sander to remove any dust or debris.

Yes, the kit includes a 20mm diameter x 4m dust extraction hose.

Warranty information is not available in the provided product details, please refer to the product packaging or Mirka's website for warranty details.

Check the dust extraction hose for blockages. Ensure the hose is securely connected to both the sander and the extraction machine. Inspect the sanding strip for clogging.

Check the sanding strip for wear and tear. Ensure the sanding plate is making proper contact with the surface. Adjust the pressure applied during sanding.