Kinderkraft Mink PRO Car Seat 40-75 cm - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Kinderkraft Mink PRO Car Seat is designed for newborns and children from birth up to 13 kg (40-75 cm tall), offering a secure rearward-facing travel option. Its key benefit is enhanced safety through advanced protection systems and adaptable fit for growing infants, though its compatibility with certain vehicle seat belt types may require checking. This i-Size certified car seat prioritizes your child's safety with features like a three-layer headrest and reinforced side protection, while the included MINK FX base offers versatile installation options.
All features
| Model Part Number | KCMIPRFXBLK00BS |
|---|---|
| Brand | Kinderkraft |
Extended Product Information
FAQs
What is the weight and height range for the Kinderkraft Mink PRO Car Seat?
The car seat is suitable for children weighing between 40 cm and 75 cm in height, typically from birth up to approximately 13 kg.
Can the car seat be installed without the MINK FX base?
The Mink PRO car seat is designed to be used with its integrated MINK FX base for installation in the vehicle. The base itself can be installed using ISOFIX or the car's seat belt.
How do I clean the car seat cover?
The fabric cover can be removed and hand-washed in cool water with mild soap. It should not be bleached or tumble dried; allow it to air dry completely.
Is this car seat suitable for air travel?
Please consult your airline directly for their specific policies on child restraint systems for air travel. The car seat is not certified for aviation use unless explicitly stated by the airline and manufacturer.
How do I adjust the headrest and harness?
The headrest and internal safety harness can be adjusted simultaneously to the correct height (35-52 cm) for your child, ensuring a secure fit as they grow.
What does i-Size certification mean?
i-Size (ECE R129) is the latest European safety standard for child car seats, focusing on enhanced protection, particularly in side impacts, and mandating ISOFIX installation for most seats within its scope.
Can the car seat be used in a forward-facing position?
No, the Kinderkraft Mink PRO Car Seat is designed exclusively for rearward-facing installation to maximize safety for infants.
Troubleshooting
Car seat base does not lock into ISOFIX anchors.
Ensure ISOFIX connectors are fully extended and properly aligned with the vehicle's anchor points. Check that the vehicle's ISOFIX anchors are not obstructed.
Support leg is not stable.
Adjust the support leg until it is firmly planted on the vehicle floor. Ensure it is at the correct angle and fully extended or retracted as needed for a stable fit.
Harness seems too loose.
Tighten the harness using the adjustment strap. Ensure the chest clip (if applicable) is at armpit level and the harness is snug enough that you cannot pinch any slack at the shoulder.
Car seat is wobbly on the base.
Ensure the car seat is correctly clicked into the MINK FX base. Remove and reattach the car seat firmly until it locks into place.
Pros and Cons
Pros
- Meets the latest i-Size safety standards.
- Advanced side and head protection systems.
- Adaptable fit for newborns and growing infants.
- Flexible installation options with the included ISOFIX base.
- Easily converts to a travel system with compatible strollers.
Cons
- Rearward-facing only installation.
- May require specific vehicle seat belt configurations for belt installation.
- Weight limit of 13 kg means it is suitable for a limited age/size range.
Setup, Compatibility & Care
Setup:
- ISOFIX Installation (with MINK FX Base): Ensure your vehicle is equipped with ISOFIX anchors. Extend the ISOFIX connectors from the base, align them with the vehicle's anchor points, and push until they click. Attach the support leg and adjust it to rest firmly on the vehicle floor.
- Seat Belt Installation (with MINK FX Base): If ISOFIX is unavailable, place the base on the vehicle seat and secure it using the car's three-point seat belt, threading it through the designated belt guides on the base. Ensure the belt is tight and the base is stable.
- Attaching the Car Seat: Click the car seat onto the installed MINK FX base.
- Adjusting Harness: Use the adjustment points to ensure the harness is snug and level with the child's shoulders.
Compatibility:
- Vehicle Type: Compatible with vehicles featuring ISOFIX anchors or standard three-point seat belts. Always consult your vehicle's manual.
- Stroller System: Compatible with most strollers using universal adapters. Check the adapter specifications for compatibility with your specific stroller model.
Care:
- Seat Cover: The fabric cover can be removed and hand-washed in cool water with mild soap. Do not bleach or tumble dry. Allow to air dry completely.
- Plastic Parts: Wipe clean with a damp cloth and mild detergent. Avoid abrasive cleaners.
- Harness Straps: Spot clean with a damp cloth and mild soap. Ensure straps are completely dry before use.