Diall Plastic Sealant Nozzle - Pack Of 3

Select the nozzle size based on the width of the gap you need to fill and the desired bead size. Smaller openings are generally used for precise applications, while wider openings are used for larger areas.

Yes, you can reuse the nozzles if they are cleaned properly after each use. Remove excess sealant and clean with the appropriate solvent.

These nozzles are designed for use with a wide range of sealants that are compatible with the cartridge or gun type. Always check the sealant's compatibility information.

Store the nozzles in a clean, dry place away from direct sunlight and extreme temperatures to prevent damage.

Use a pin or wire to gently clear the blockage. Be careful not to damage the nozzle tip. You can also soak the nozzle in a solvent suitable for the sealant used.

Replace the nozzle with a new one from the pack. Do not attempt to use a damaged nozzle.

These nozzles are specifically designed for Diall foam guns. Check your foam gun’s compatibility before use.

The pack includes 3 nozzles.

Check for clogs in the nozzle and clear them using a pin or wire. Ensure the cartridge is properly inserted and the trigger is working correctly.

Make sure the nozzle is securely attached to the cartridge or gun. Check for any damage to the nozzle and replace if necessary.

Ensure the cartridge has sealant, the nozzle is clear, and the trigger mechanism is functioning. If using a foam gun, make sure the gun is properly primed.