Dylon Hand Fabric Dye - Espresso Brown

Setup, Compatibility & Care

Setup

1. Preparation: Gather your Dylon Hand Dye sachet(s), 250g of ordinary household salt per sachet, a clean basin or bucket large enough for your fabric, rubber gloves, and the fabric item(s) to be dyed.
2. Pre-wash Fabric: Always pre-wash your fabric item thoroughly, even if new, to remove any dirt, stains, or fabric finishes that could interfere with dye absorption. Leave it damp.
3. Mixing the Dye:

• Wear rubber gloves to protect your hands.
• Dissolve the dye sachet contents in approximately 500ml of warm water in a separate container, stirring until fully dissolved.
• In your main dyeing basin, add about 6 liters of warm water (around 40°C / 104°F).
• Stir in the dissolved dye solution.
• Add 250g of salt to the dye bath and stir well until dissolved.

1. Dyeing Process:

• Carefully immerse the damp, pre-washed fabric into the dye bath.
• Stir the fabric continuously for the first 15-20 minutes, then frequently for the next 45 minutes to 1 hour, or until the desired shade is achieved.
• The longer the fabric stays in the dye bath, the deeper the color will be.

1. Rinsing: Once dyeing is complete, remove the fabric and rinse it thoroughly under cold running water until the water runs clear.
2. Washing: Wash the newly dyed fabric separately in cold water with a mild detergent for the first few washes to remove any excess dye.

Compatibility

• Suitable Fabrics: This dye is specifically designed for use on natural cellulosic fibers: cotton, linen, and viscose.
• Synthetic Blends: Fabrics that are a mix of natural fibers and synthetics (e.g., cotton-polyester blend) will only dye to lighter shades. The dye will only affect the natural fiber component.
• Unsuitable Fabrics: Pure synthetic fabrics such as 100% polyester, nylon, acrylic, acetate, and materials like wool or silk will not dye with this product. Always check your fabric's care label for its composition.
• Amount: One sachet effectively dyes 250g of dry fabric to a full shade. For larger amounts, the resulting color will be lighter.

Care for Dyed Items

• Initial Washes: Wash newly dyed items separately for the first 2-3 washes to prevent any residual dye from bleeding onto other clothes.
• Washing Temperature: Wash dyed items in cool to warm water (not hot) to help preserve the color intensity.
• Detergent: Use a color-safe detergent.
• Drying: Air dry or tumble dry on a low setting. Avoid direct prolonged sunlight to prevent fading over time.
• Storage: Store dyed garments away from prolonged direct sunlight.