Masonry Drill Bit - GTV - 18mm x 260mm

This SDS+ masonry drill bit is designed for drilling into brick, stone, concrete, and reinforced concrete.

Yes, you need a rotary hammer drill that is equipped with an SDS-plus chuck system. It is not compatible with standard drill chucks.

No, this bit is specifically designed for masonry and concrete and should not be used on wood or metal.

Insert the bit shank fully into the SDS-plus chuck and release the chuck sleeve. Gently twist the bit to confirm it is locked in place.

The lifespan depends on usage frequency, material hardness, and proper care. Regular cleaning, inspection, and avoiding excessive force will prolong its life.

SDS-plus is a specific type of chuck system used on rotary hammer drills, designed for efficient power transfer and quick bit changes.

No, this bit requires the SDS-plus chuck found on rotary hammer drills. It will not fit or function in a standard drill chuck.

Ensure the chuck sleeve is fully retracted and the bit shank is clean. Re-insert firmly.

Check if the bit is dull or damaged. Ensure you are using the correct drilling speed and hammer action on your rotary hammer. Verify compatibility with the material being drilled.

Reduce drilling pressure and allow the bit and drill to cool periodically. Ensure you are not forcing the bit through excessively hard material.

Ensure the bit is properly seated in the chuck and that the bit itself is not damaged or bent. Check drill settings.