Unfinished Pine L-Shape Moulding - 2400mm L x 27mm W x 20mm T - B&Q

You will need a saw (hand saw or miter saw), measuring tape, pencil, wood glue, nails or a nail gun, sandpaper, and finishing materials (paint, stain, etc.).

While the moulding itself is made of pine, it is not specifically treated for outdoor use. If used outdoors, it must be properly sealed with an exterior-grade finish to protect it from the elements.

Use a miter saw or a miter box and hand saw to cut angles. Measure the angles carefully and make precise cuts.

You can use paint, stain, varnish, or a combination of these. Choose a finish that suits your desired look and the level of protection required.

Use wood filler to fill the nail holes. Once the filler is dry, sand the area smooth and apply your chosen finish.

No, this moulding comes unfinished and requires priming before painting.

Ensure the surfaces are clean and free of dust before applying glue. Use appropriate wood glue and apply sufficient pressure during the drying process. Consider using a construction adhesive for extra hold.

Pre-drill pilot holes before nailing to prevent splitting.

Ensure the surface is properly sanded and primed before painting. Use a primer specifically designed for wood.