Best current price£129.99from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£129.99Visit shop Vertical Single Flat Panel White Central Connection Radiator 1800 X 410 Mm 8140375970675
Visit shop
B&Q£142.99Visit shop B&Q - 1800 X 410 mm Vertical Single Flat Panel White Central Connection Radiator
Visit shop12 offers from £129.99 - £224.99
View price history by clicking the chart icon.
The Nes Home 1800 X 546 mm Vertical Flat Panel White Designer Radiator is for homeowners seeking a stylish and efficient heating solution that doubles as a modern decorative element. Its key benefit is providing significant heat output with a sleek, vertical design that enhances room aesthetics. A potential caveat is that its vertical orientation might require specific wall space planning.
| Colour | White |
|---|---|
| Brand | NES Home |
The dimensions are 1800 mm in height and 546 mm in width.
Yes, its stylish design and efficient heat output make it a great choice for bathrooms, adding a modern touch while keeping the space warm.
Radiator valves and a lockshield valve are typically required for installation and may need to be purchased separately depending on your existing plumbing setup. Please check the product listing or consult with your installer.
Clean with a soft, damp cloth. Avoid abrasive cleaners. A mild detergent can be used for tougher marks, followed by rinsing and drying.
This model is specifically designed as a vertical radiator. Installing it horizontally may affect its performance and could void the warranty.
The radiator provides a super heat output, designed to efficiently warm large or chilly rooms. Specific BTU (British Thermal Unit) figures would typically be available in detailed product specifications.
Professional installation by a qualified plumber is highly recommended to ensure safe and correct connection to your central heating system.
Check that the central heating system is on and functioning. Ensure the radiator valves are fully open. Bleed the radiator to release any trapped air.
This usually indicates trapped air. Bleed the radiator from the top valve until water starts to come out, then close the valve. Ensure the lockshield valve is also open.
The noise could be due to air in the system or expansion and contraction of the metal. Bleed the radiator. If the noise persists, check the system pressure and consider professional advice.
Turn off the heating system and isolate the radiator. Gently tighten the leaking connection. If the leak persists, you may need to replace the valve or re-seal the connection. Professional help is advised.
Setup:
This radiator is designed for connection to a standard central heating system. Installation typically involves mounting the radiator securely to the wall using the provided brackets and connecting it to your existing hot water pipes. Professional installation by a qualified plumber is recommended to ensure correct and safe operation and to comply with building regulations.
Compatibility:
Compatible with most standard central heating systems, including those using combination boilers, system boilers, or conventional vented systems. Ensure your system has adequate pressure and flow rate for optimal performance. Valves (radiator valves and lockshield valve) are usually required but may need to be purchased separately depending on your existing setup.
Care:
To maintain its appearance, clean the radiator periodically with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish. For stubborn marks, a mild detergent can be used, followed by a thorough rinse with clean water and drying. Bleed the radiator if you notice cold spots to release trapped air.
