E-Tech Alloy Wheel Spray Paint - Technik Grey - 400ml

A 400ml can should be sufficient for several wheels, depending on their size and the number of coats applied. It is always best to have an extra can on hand.

Priming is not always required, but it can improve adhesion and the overall finish. If the wheels have significant damage, using a primer is advisable.

The paint is quick-drying. Refer to the can for specific drying times, but usually, it's dry to the touch within a short time. Allow the paint to fully cure before driving.

The paint is specifically designed for alloy wheels. While it might adhere to other surfaces, results may vary. Use it as directed for best results.

The paint provides a Technik Grey metallic anthracite finish, offering a modern and stylish look.

Store the can in a cool, dry place away from direct sunlight and heat. Make sure the cap is securely in place to prevent the paint from drying out.

Apply thinner coats and ensure the can is held at the correct distance from the wheel. Avoid applying too much paint at once.

Ensure the wheel surface is properly prepared by cleaning, sanding, and degreasing before painting. Ensure proper drying time.

Ensure even coverage by applying multiple thin coats. Color appearance can vary based on lighting and application.