Best current price£14.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£14.99Visit shop B&Q - Pla 3D Printer Filament 1.75mm 1Kg Copper Spool Low Warp Fdm Printing
Visit shop2 offers from £14.99 - £15.90
View price history by clicking the chart icon.
The ATEK Copper PLA 3D Printer Filament is an ideal choice for makers, hobbyists, and prototype designers who prioritize aesthetic finish alongside reliable extrusion performance. This material is specifically designed for 1.75mm compatible FDM printers, offering high dimensional accuracy for consistent results in decorative projects, cosplay accessories, and intricate models. While it excels in visual appeal and ease of use, users should remember that like all PLA, it is best suited for indoor applications and may not withstand high-temperature environments.
| Brand | ATEK |
|---|
While it can sometimes be printed on a cold bed, a heated bed set between 50°C and 60°C is highly recommended to improve adhesion and prevent warping.
No, this is a standard PLA plastic with a copper-style pigment. It is not electrically conductive.
Store in a cool, dry place, ideally inside the provided vacuum-sealed bag with the desiccant packet to prevent moisture absorption.
Most printers perform best with this filament between 190°C and 220°C, depending on your specific printing speed and nozzle size.
No, this filament is strictly 1.75mm and will not function correctly in printers designed for 2.85mm or 3mm filament.
Ensure the print bed is clean and properly leveled. You may also increase the bed temperature slightly or use a glue stick for added support.
Adjust your retraction settings in your slicer software to pull the filament back slightly faster or at a greater distance.
Check for moisture absorption and ensure your nozzle temperature is sufficient to melt the PLA properly. Clean the hotend if necessary.
To achieve the best results, ensure your printer is equipped with a 1.75mm nozzle assembly. Standard PLA print temperatures generally fall between 190°C and 220°C, though you should verify this against your specific printer manufacturer's recommendations. For bed adhesion, a standard heated bed set to 50°C-60°C works well. To ensure long-term care, keep the spool in its original vacuum-sealed bag with the included desiccant when not in use, as PLA can absorb ambient moisture, which may lead to popping sounds or decreased surface quality during printing.
