Standard Composite Cladding Angle Trim - 41mm x 41mm x 3.6mtr Teak

This trim is primarily designed for external corner protection and finishing, though it can be adapted for internal use if the aesthetic match is suitable.

You can use corrosion-resistant exterior screws or a high-tack exterior-grade adhesive, depending on the substructure and installation preferences.

No, the composite material is pre-finished and does not require painting, sealing, or staining.

You will need a measuring tape, a fine-tooth hand saw or power saw, and an applicator gun if using adhesives.

It is designed for standard composite cladding profiles, but please verify your specific board thickness to ensure the 41mm dimension provides sufficient coverage.

Check if the underlying batten is plumb; if the wall is bowed, you may need to shim the batten before installing the trim.

Apply a thin bead of exterior-grade color-matched sealant along the edge to bridge small gaps and maintain a watertight seal.

Use a sharp circular saw with a fine-tooth blade and support the trim fully on a workbench to prevent splintering during the cut.