Best current price£7.69from B&Q
Shopping.co.uk recommended and popular offers
B&Q£7.69Visit shop B&Q - Replaceable Notched Blade 280mm Stainless Steel For Epoxy Resin SqueegeeR3Self Levelling Compound Flooring Diy
Visit shop10 offers from £7.69
View price history by clicking the chart icon.
The Toolty Replaceable Notched Blade (A4) is designed for professional contractors and dedicated DIYers working with poured resin, self-leveling cement, and various flooring compounds. This stainless steel blade offers superior consistency and precision, significantly speeding up the application process across both large floor areas and intricate furniture work. However, users should note that this is a replacement component and requires the dedicated Toolty Epoxy Resin Squeegee frame to function, meaning it is not a standalone tool.
| Brand | TOOLTY |
|---|
No, this is a replacement blade only. You must have the Toolty Epoxy Resin Squeegee system to use it.
A4 refers to the specific notch size and profile, which determines the depth and volume of the material being applied.
This tool is specifically engineered for high-viscosity flooring compounds and resins. It is not suitable for thin liquids like standard wall paint.
While the stainless steel is corrosion-resistant, always wipe it clean and store it in a dry, low-humidity environment.
Yes, the 280mm width is a standard professional size that balances coverage speed with maneuverability.
Check that the blade is fully inserted into the frame slot and ensure the frame locking screws are tightened securely.
Verify the blade is not bent and is fully seated. Ensure your application angle is consistent; holding the squeegee at too steep an angle can cause the blade to lift slightly off the surface.
Use a stiff plastic scraper or a brass wire brush to carefully dislodge hardened residue, being careful not to nick the stainless steel edge.
To set up your blade, simply loosen the locking mechanism on your Toolty Epoxy Resin Squeegee frame, slide the existing blade out, and insert the A4 replacement until it is securely locked in the groove. Ensure the blade is properly centered before tightening the frame fasteners.
Compatibility is limited to the Toolty Epoxy Resin Squeegee system. This blade will not fit standard household squeegees or competitor frames.
Care instructions are vital for longevity: always clean the blade immediately after use before the compound cures. Use an appropriate solvent (like acetone for resin) while the material is still wet. After cleaning, dry the stainless steel thoroughly to prevent water spots or oxidation. Store in a dry area to maintain the edge integrity.
