Best current price£14.96from Elesi.com
Shopping.co.uk recommended and popular offers
Elesi.com£14.96Visit shop Lieber Black Brushed Chrome 1 Gang 2 -Way Intelligent Dimmer 100W Led (250W Halogen/Incandescent) - Size: 86Mm X 86Mm X 2.95 Mm
Visit shop1 offer from £14.96
View price history by clicking the chart icon.
This Lieber Intelligent Dimmer in Brushed Chrome is designed for homeowners looking to add modern, efficient lighting control to their spaces. Its key benefit is providing smooth dimming for compatible LED bulbs, offering ambiance and energy savings. A caveat is its specific requirement for dimmable LED bulbs; standard LEDs or other bulb types may not function correctly. The dimmer features a screwless brushed finish that resists fingerprints and reflections, a 100W LED (250W Halogen) capacity, and a 1-gang, 2-way intelligent trailing edge design.
| Colour | Silver |
|---|---|
| Model Part Number | SS-LL-40-LTS201-BCB |
| Brand | LIEBER |
You must use dimmable LED bulbs. The dimmer is rated for 100W LED (equivalent to 250W Halogen). Non-dimmable LEDs or other bulb types will not work correctly and may damage the dimmer.
Yes, this is a 1-gang, 2-way dimmer, meaning it can be used in a circuit where the light is controlled from two different locations, provided it is wired correctly.
Use a soft, dry cloth for routine cleaning. For smudges, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid abrasive cleaners.
The dimmer plate measures 86mm x 86mm with a depth of 2.95mm.
While it has a 250W Halogen equivalent rating, it is primarily designed for LED bulbs. If using halogen, ensure the total wattage does not exceed 250W and that your wiring is suitable.
Trailing edge (or reverse phase) dimming is a modern dimming technology that is generally more compatible with LED and CFL loads, providing smoother dimming than older leading-edge systems.
The screwless design provides a cleaner, more modern look by hiding the screws that typically attach the faceplate to the wall. It also makes cleaning easier.
Ensure you are using dimmable LED bulbs. Check that the total wattage of the bulbs is within the dimmer's range (100W LED max). The issue might be with the LED bulb itself; try a different compatible brand.
Verify all wiring connections are secure and correct for a 2-way circuit. Check the circuit breaker or fuse for the lighting circuit. Ensure the bulb is functional.
Confirm that the LED bulbs are rated as dimmable and are compatible with trailing edge dimmers. Some LED bulbs have poor dimming performance regardless of the dimmer used.
Some warmth is normal, especially under full load. If it becomes excessively hot, ensure the load does not exceed the 100W LED capacity and that the wiring is correct. Consider if ventilation around the switch is adequate.
Setup: This dimmer switch is designed to replace a standard light switch. Ensure power is turned off at the mains before attempting installation. Connect the wires according to the 2-way switching diagram, typically involving a live wire, a switched live, and two connecting wires for the 2-way function. Professional installation is recommended if you are unfamiliar with electrical wiring.
Compatibility: This dimmer is specifically designed for dimmable LED bulbs with a load capacity of up to 100W (equivalent to 250W Halogen). It uses trailing edge (reverse phase) dimming technology. It is *not* compatible with non-dimmable LEDs, incandescent bulbs, halogen bulbs (unless using the halogen equivalent wattage), or other types of lighting not explicitly stated as dimmable LED.
Care: Clean the surface with a soft, dry or slightly damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the brushed finish. The screwless design allows for easy cleaning around the plate.
