This treated timber is ideal for garden projects such as raised beds, composters, pergolas and gen...This treated timber is ideal for garden projects such as raised beds, composters, pergolas and general fencing or non structural internal work, such as carcassing, boxing in, battening and framing. This Metsä Wood smooth planed whitewood spruce stick timber is 2.4m long, 119mm wide, and 27mm thick. PSE (Planed Square Edge) timbers are a machined square-edged section of timber.
- Smooth Planed Pse Whitewood Spruce Stick Timber (L)2.4M (W)44mm (T)12mmFree delivery in 1–3 days£5.35Visit shop →
- Smooth Planed Pse Whitewood Spruce Stick Timber (L)2.4M (W)34mm (T)18mmFree delivery in 1–3 days£5.35Visit shop →
- Smooth Planed Pse Whitewood Spruce Stick Timber (L)2.4M (W)44mm (T)18mmFree delivery in 1–3 days£6.40Visit shop →
- Smooth Planed Pse Whitewood Spruce Stick Timber (L)2.4M (W)34mm (T)27mmFree delivery in 1–3 days£7.47Visit shop →
- Smooth Planed Pse Whitewood Spruce Stick Timber (L)2.4M (W)44mm (T)44mmFree delivery in 1–3 days£7.75Visit shop →
- Smooth Planed Pse Whitewood Spruce Stick Timber (L)2.4M (W)44mm (T)27mmFree delivery in 1–3 days£8.47Visit shop →
- Smooth Planed Pse Whitewood Spruce Stick Timber (L)2.4M (W)70mm (T)18mmFree delivery in 1–3 days£8.75Visit shop →
- Smooth Planed Pse Whitewood Spruce Stick Timber (L)2.4M (W)34mm (T)34mmFree delivery in 1–3 days£9.25Visit shop →
- Smooth Planed Pse Whitewood Spruce Stick Timber (L)2.4M (W)44mm (T)34mmFree delivery in 1–3 days£9.97Visit shop →
Product Information
Full details
This guide is for DIY enthusiasts and professionals seeking a versatile timber solution for various garden projects and non-structural internal applications. The Metsa Wood Smooth Planed Whitewood Spruce Stick Timber offers pre-treated durability and a smooth finish, making it ideal for immediate use; however, remember it's specifically designed for non-load-bearing purposes.
All features
Brand
Metsä Wood
Extended Product Information
FAQs
Is this Metsa Wood timber suitable for outdoor use?
Yes, this whitewood spruce timber is pre-treated, making it suitable for a variety of outdoor garden projects.
Can I use this timber for structural supports in a building?
No, this timber is intended for non-structural internal work and general garden projects. It is not suitable for load-bearing structural applications.
What does 'Smooth Planed' or 'PSE' mean?
PSE stands for 'Planed Square Edge,' meaning the timber has been machined on all four sides to a smooth finish with square edges, making it easier to work with and more aesthetically pleasing.
Do I need to treat the timber before painting or staining?
The timber is already treated. You can typically apply paint or stain directly after ensuring the surface is clean and dry. However, always treat any cut ends when using outdoors.
What are the exact dimensions of this timber stick?
Each stick is 2.4 meters long, 119mm wide, and 27mm thick.
How should I store this timber if I'm not using it immediately?
Store the timber horizontally on a flat, dry surface, off the ground, and protected from direct sunlight, rain, and excessive humidity to prevent warping or damage.
Can I cut this timber easily?
Yes, this whitewood spruce timber can be easily cut using standard woodworking saws. Always use appropriate safety gear like eye protection.
Troubleshooting
Timber splits when fastening screws or nails.
Pre-drill pilot holes slightly smaller than the fastener diameter. This reduces stress on the wood and prevents splitting, especially near edges.
Timber shows signs of warping or twisting after storage.
Ensure timber is stored flat, off the ground, and in a dry, temperature-consistent environment away from direct sunlight or excessive moisture. If already warped, it may need to be replaced or cut to smaller, usable sections.
Visible signs of mildew or surface mold on outdoor timber.
Clean the affected areas with a mild bleach solution or a timber-specific fungicidal wash, then rinse thoroughly. Ensure good air circulation around the timber to prevent recurrence.
Cut ends of outdoor timber appear to be degrading faster than the rest.
Always apply an end-grain wood preservative or treatment to any cut ends when the timber is used in an outdoor environment. This seals the most vulnerable part of the timber from moisture ingress.
Pros and Cons
Pros
Pre-treated for enhanced resistance to external elements, suitable for outdoor projects.
Smooth planed finish reduces preparation time and provides a clean, professional look.
Highly versatile for both garden projects and non-structural indoor framing.
Consistent dimensions simplify planning and construction.
Cons
Not intended for structural, load-bearing applications.
Requires re-treatment of cut ends when used outdoors to maintain protection.
Specific dimensions may require cutting for precise project fits.
Info needed: Potential for warping if not stored correctly before use.
Setup, Compatibility & Care
Setup
Measure and Mark: Accurately measure your project dimensions and mark the timber using a pencil and tape measure.
Cut: Use a suitable saw (e.g., hand saw, circular saw, miter saw) to cut the timber to your desired lengths. Always ensure the timber is securely supported and wear eye protection and gloves.
Fasten: Use appropriate timber screws, nails, or bolts for your specific application. For best results, especially when joining pieces, consider using wood glue in conjunction with fasteners.
Compatibility
Fasteners: Compatible with most standard wood screws, nails, and bolts. Choose rust-resistant options for outdoor use.
Adhesives: Works well with wood glues for stronger joints.
Finishes: Can be painted, stained, or varnished to match your aesthetic preferences. Ensure the timber is clean and dry before applying finishes.
Care
Storage: Store timber in a dry, well-ventilated area, off the ground, and protected from direct sunlight and rain to prevent warping or damage before use.
Outdoor Maintenance: While treated, any freshly cut ends of the timber used outdoors should be re-treated with an appropriate timber preservative to maintain its resistance to rot and decay.
Regular Inspection: For outdoor installations, periodically inspect the timber for any signs of wear, damage, or fungal growth, and address them promptly.