Best current price£7.01from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£7.01Visit shop Timco 434127 Rising Butt Hinge (466) - Right Hand - Electro Brass 100 X 86
Visit shop
B&Q£11.53Visit shop B&Q - Rising Butt Hinges Right Hand Steel Electro Brass100 X 86
Visit shop6 offers from £7.01 - £14.95
View price history by clicking the chart icon.
These Timco Rising Butt Hinges are designed for applications requiring doors to lift as they open, perfect for overcoming uneven floors or carpet obstructions. Their key benefit is the self-closing mechanism and the ability to easily remove the door from the hinge. A potential consideration is that they are specifically right-hand oriented.
| Colour | Bronze |
|---|---|
| Model Part Number | 434127 |
| Brand | Timco |
These hinges are primarily designed for internal use. The electro brass finish offers some corrosion resistance, but they are not typically rated for harsh exterior weather conditions.
No, these are specifically right-hand rising butt hinges. Left-hand versions would be required for doors that open from the left.
Specific weight limits depend on the number of hinges used and door dimensions. It is recommended to consult the manufacturer's guidelines for the appropriate number of hinges for your door size and weight.
Use a soft, damp cloth to wipe away dust and grime. For tougher marks, a mild soap and water solution can be used, followed by drying with a clean cloth. Avoid abrasive cleaners or metal polishes.
A rising butt hinge has a special knuckle design that causes the door to lift slightly as it opens. This is useful for clearing uneven floors, carpets, or other obstructions.
With the door in the closed position, the knuckle is not fixed, allowing you to lift the door straight up and off the hinge pins. Ensure you have support for the door before removing it.
The knuckle diameter is 15.5mm and the hole diameter is 6.90mm.
Check hinge alignment and ensure the door is not catching on the floor or frame. Verify that the rising action is not obstructed. Re-check right-hand orientation.
Apply a small amount of lubricant to the knuckle mechanism. Clean any debris from the hinge joint.
Ensure the hinge pins are fully seated and that no paint or debris is obstructing the knuckle mechanism. Ensure the door is in the fully closed position before attempting to lift.
Verify the floor surface is clear of obstructions. Check that the door is properly seated on both hinges. Ensure the rising knuckle is free of dirt or damage.
Setup: These hinges are designed for standard door fitting. Ensure the door and frame are prepared for butt hinges. Due to the rising action, precise alignment is crucial for smooth operation. The hinges are right-hand specific, so confirm the door swing direction before installation.
Compatibility: Suitable for internal doors where a rising or self-closing action is beneficial. Compatible with wooden doors and standard door frames. Check that the door weight is within the recommended limits for this type of hinge.
Care: Clean the hinges periodically with a soft, damp cloth. Avoid abrasive cleaners, as they can damage the electro brass finish. For smooth operation, a light application of appropriate lubricant may be applied to the knuckle mechanism annually, especially in high-traffic areas.
