Best current price£13.59from www.pond-planet.co.uk
Shopping.co.uk recommended and popular offers
www.pond-planet.co.uk£13.59Visit shop Kockney Koi Black Pvc Solvent Weld Ball Valves
Visit shop
B&Q£16.99Visit shop B&Q - Kockney Koi Ball Valve 56mm-76mm Black With Yellow Handle
Visit shop3 offers from £13.59 - £17.80
View price history by clicking the chart icon.
The Kockney Koi 50MM PVC Solvent Weld Ball Valve is an essential component for pond enthusiasts and aquarium hobbyists who require precise control over water flow in their filtration or drainage systems. It provides a reliable, leak-free shut-off mechanism that is perfect for managing waste outlets or isolating sections of pipework for maintenance. While it offers robust construction and a highly visible handle, users should note that the solvent weld installation requires careful preparation to ensure a permanent, watertight bond.
| Model Part Number | KKBV-50MM |
|---|---|
| Brand | Kockney Koi |
This valve is designed for 50MM solvent weld PVC pipework common in pond installations.
Yes, the PVC construction is designed for constant water contact and is suitable for submerged or external use.
Since this is a solvent weld unit, internal seals are permanent. If the internal ball mechanism fails, the valve typically requires replacement.
The valve is designed to fit directly onto 50MM PVC pipe. No additional fittings are required for a direct solvent weld connection.
Follow the instructions on your specific solvent weld adhesive, though usually 24 hours is recommended before full pressure is applied.
Ensure the pipe was fully seated and solvent was applied evenly. You may need to apply a secondary bead of sealant or re-cut the pipe if the joint was misaligned.
Debris or calcium buildup may be affecting the internal ball. Try flushing the valve with clean water or use a silicone-based lubricant if necessary.
To install this valve, ensure your 50MM PVC pipe ends are clean, dry, and free of debris. Use a high-quality solvent weld adhesive specifically designed for PVC pipe applications. Apply an even layer of solvent to both the valve socket and the pipe, then insert with a slight twist to ensure a complete, airtight seal. Allow the recommended curing time specified by your adhesive manufacturer before subjecting the joint to water pressure. For long-term care, periodically rotate the handle through its full range of motion to prevent mineral deposits from seizing the internal ball mechanism, especially in hard water environments.
