Best current price£62.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£62.99Visit shop B&Q - Cartridge Car Body Seam Sealer Sealant Synthetic Rubber Based 310Ml X6
Visit shop3 offers from £62.99 - £65.99
View price history by clicking the chart icon.
The Tetrosyl Car Body Seam Sealer is an essential tool for automotive bodywork enthusiasts and professional technicians who need to protect vehicle overlap seams from moisture and dust ingress. This synthetic rubber-based sealant provides a permanently flexible, non-slumping barrier that maintains structural integrity on both vertical and horizontal surfaces. While it offers excellent versatility for various painting systems, users should note that a full cure time of approximately two hours at room temperature is required before it can be handled or painted over.
| Model Part Number | TETCSS310PK6 |
|---|---|
| Brand | Tetrosyl |
Yes, the formula is non-slumping and is designed specifically to stay in place on both vertical and horizontal surfaces.
The sealant dries in approximately 2 hours at 20 degrees Celsius.
Yes, it can be overcoated with nitro-cellulose, acrylic, or compliant refinishing paint systems once fully cured.
No, it is designed for use with a standard, off-the-shelf caulking gun.
Keep them in a cool, dry place. Leave a small amount of sealer protruding from the nozzle to create a self-sealing plug.
It is designed to protect overlap seams in vehicle bodywork against the ingress of dust and water.
Ensure the nozzle tip is cut properly and check that the caulking gun mechanism is functioning correctly. If cold, warm the cartridge slightly in room temperature air.
Verify that you have not applied too much material in a single pass. If the gap is very deep, apply in thinner layers, allowing time for the material to stabilize.
Ensure the product is fully cured before painting. Clean the surface of the cured sealant with a degreaser to remove any surface contaminants before applying paint.
To begin using the sealant, cut the nozzle to the desired bead width and load the cartridge into a standard caulking gun. Ensure your surfaces are clean, dry, and free of grease or debris for the best adhesion results.
Regarding care, store any unused cartridges in a cool, dry environment to extend shelf life. If you do not empty a full cartridge, leave a small amount of the sealer protruding from the nozzle. This will harden into a plug that protects the remaining product inside. Before your next project, simply pull out this hardened plug to reveal fresh, usable sealant.
