Xcel Home Brass Compression Tee - 22mm X 22mm X 28mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Xcel Home Brass Compression Tee is designed for plumbers and installers working with domestic and commercial plumbing systems. It provides a reliable and secure three-way connection for 22mm copper pipes with a reduced 28mm outlet, eliminating the need for soldering. While offering a durable brass construction for longevity and compatibility with hot and cold water systems, users should ensure correct pipe preparation for a leak-free seal.
All features
| Model Part Number | 5056866119788 |
|---|---|
| Brand | Xcel Home |
Extended Product Information
FAQs
What type of pipe is this tee compatible with?
This compression tee is specifically designed for use with 22mm copper pipes.
Can this fitting be used for gas lines?
No, this fitting is intended for water systems only and should not be used for gas installations.
Do I need any special tools for installation?
You will need two wrenches: one to hold the tee body steady and another to tighten the compression nuts.
What is the maximum pressure this fitting can handle?
While specific pressure ratings should be confirmed with the manufacturer's documentation, compression fittings are generally suitable for standard domestic water pressures.
Can I reuse the olive?
It is generally recommended to use a new olive for each connection to ensure a reliable, leak-free seal.
What does 'reduced tee' mean?
A reduced tee means that the branch outlet (28mm in this case) is a different size than the main run of the tee (22mm).
Troubleshooting
Leak at the compression joint.
Ensure the pipe is fully inserted, the olive is correctly positioned, and the compression nut is tightened sufficiently but not over-tightened. Check for pipe deformation or damage.
Difficulty fitting the pipe.
Verify that the pipe is clean, round, and free from burrs or scale. Ensure no debris is inside the fitting body.
Fitting does not seem secure.
Confirm that the correct size compression nut and olive are used. Retighten the nut ensuring a firm, stable connection.
Pros and Cons
Pros
- No soldering required, simplifying the installation process.
- Durable brass construction ensures longevity and resistance to corrosion.
- Suitable for both hot and cold water systems.
- Provides a secure and leak-resistant connection.
- Facilitates easy branching of pipework in reduced outlet scenarios.
Cons
- Requires careful tightening to prevent leaks.
- Primarily designed for copper pipes.
- May require specific tools for compression fitting.
- Reduced outlet size limits its use in systems requiring uniform pipe diameters throughout.
Setup, Compatibility & Care
Setup:
- Ensure the copper pipes are clean, free from burrs, and cut square.
- Slide the compression nut and then the olive onto the pipe.
- Insert the pipe fully into the tee body.
- Slide the olive up to the fitting and screw the nut on by hand.
- Tighten the nut further with a wrench until a secure fit is achieved. Avoid over-tightening.
Compatibility:
- Designed for use with 22mm copper pipes.
- Compatible with standard hot and cold water plumbing systems.
- Ensure the system's pressure and temperature ratings are within the product's specifications (refer to manufacturer datasheet if available).
Care:
- Regularly inspect for any signs of leaks or damage.
- No specific maintenance is typically required for the fitting itself, beyond standard plumbing system checks.