Shopping.co.uk

Quick Dam Flood Barrier - 3m - Pack of 8

Not AvailableQuick Dam Flood Barrier - 3m - Pack of 8
Not Available

Protect your home or property in times of flooding with Quick Dam Flood Barriers. Absorb, contain,...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later.

Product Information

Full details

The Quick Dam Flood Barrier is designed for homeowners and property managers needing a rapid, effective solution for water damage prevention. Its key benefit is the water-activated expansion that contains, controls, and diverts flood water without sandbags. A notable caveat is that it is not suitable for saltwater environments.

All features

Model Part NumberQUI-QD610-8
BrandQuick Dam

Extended Product Information

FAQs

How long does it take for the Quick Dam to fully expand?

The Quick Dam typically grows to its full height of 3.5 inches within approximately 10 minutes of contact with water.

Can I use these barriers with saltwater?

No, Quick Dam Flood Barriers are designed for fresh water only and are not effective with saltwater.

How many barriers are in a QD610-8 pack?

The QD610-8 pack contains 8 Quick Dam Flood Barriers, each measuring 3 meters (10 feet) in length.

What is the weight of a barrier when fully expanded?

Each 3m/10ft barrier can absorb approximately 6.6 gallons of water, swelling to a weight of about 68 lbs (30.8 kg).

Can I stack the barriers for more height?

Yes, the dual lobe design provides a stable base for stacking multiple barriers in a pyramid formation to increase the wall height.

How should I store the barriers after use?

For reuse, allow the barriers to dry completely in a well-ventilated area. Once dry, they can be stored in a cool, dry place. If they cannot be dried or are damaged, they can be disposed of in regular trash.

Do I need any tools to set up the Quick Dam?

No, no additional tools or supplies are needed. They are designed for quick and easy deployment.

Troubleshooting

Barrier not expanding sufficiently.

Ensure the barrier is in direct contact with fresh water. The expansion relies on water absorption. Check that the water is not saltwater, which can inhibit expansion.

Barrier is rolling out of position.

The dual lobe design helps prevent rolling, but ensure the barrier is placed on a relatively flat surface. For increased stability, stack additional barriers on top.

Water is seeping through the barrier.

For significant water flow or height, multiple barriers may need to be stacked. Ensure there are no gaps between barriers if multiple are used in sequence.

Barrier does not dry for reuse.

Allow ample time for drying in a well-ventilated area. Avoid direct heat, which could damage the absorbent material. If significant debris is present, it may hinder drying.

Pros and Cons

Pros

  • Extremely fast deployment in emergency situations.
  • No need for sand or heavy lifting like traditional sandbags.
  • Effective in containing and diverting fresh water issues.
  • Compact storage, ready for immediate use.
  • Environmentally safe and easy to dispose of.

Cons

  • Not effective or suitable for saltwater.
  • Expansion time can vary based on water temperature and volume.
  • Requires multiple barriers to be stacked for significant water levels.
  • May require drying for storage and potential reuse.

Setup, Compatibility & Care

Setup:

  1. Unpack the Quick Dam Flood Barriers.
  2. Lay the barrier flat in the desired location where water is expected.
  3. As water comes into contact with the barrier, it will begin to absorb and swell.
  4. Allow approximately 10 minutes for the barrier to reach its full height of 3.5 inches.
  5. For higher walls, stack additional barriers in a pyramid formation.

Compatibility:

  • Designed for use with fresh water sources (rain, ice melt, household leaks).
  • Not suitable for saltwater.
  • Works on most flat surfaces, including concrete, asphalt, and soil.

Care & Storage:

  • If reusing, allow the barriers to dry completely. This can take several days. Once dry, they can be stored in their original compact state.
  • Store in a cool, dry place away from direct sunlight.
  • Dispose of used barriers in regular household trash once they have served their purpose or if they cannot be effectively dried for reuse.