Truma Thermostat Plate Kit - Combi 4/4E/6/6E

The installation manual is included with the Truma Thermostat Plate Kit. You can also download it from the Truma website.

You will need basic tools such as screwdrivers, a wire stripper, and possibly a multimeter. Consult the manual for specific tool requirements.

It is recommended to have your Truma Combi heater serviced annually or as recommended by the manufacturer.

Yes, if you are comfortable with electrical and heating system work. However, professional installation is recommended for optimal safety and performance.

The warranty information is typically included in the product documentation. Contact your dealer for details.

Calibration instructions are usually found in the thermostat's manual. Follow the specific steps provided to ensure accurate temperature readings.

Mount the plate in a location that is easily accessible and away from direct sunlight, drafts, and heat sources for accurate temperature sensing.

Check the power supply to the heater and the thermostat. Ensure the plate kit is properly connected.

Calibrate the thermostat according to the manufacturer's instructions. Ensure the sensor is not blocked.

Check the thermostat setting. Make sure the ambient temperature is below the set point. Inspect for any air leaks that could be affecting the readings.

Consult the Truma Combi heater manual for specific error code meanings and troubleshooting steps.