Feather Edge Fence Panel - 6 x 3ft - Brown

Best current price£183.60from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£183.60Visit shop - 6' X 3' Feather Edge Pressure Treated Wooden Fence Panel (X3 Panels)
Visit shop
Best current price£183.60from B&Q
Shopping.co.uk recommended and popular offers
B&Q£183.60Visit shop - 6' X 3' Feather Edge Pressure Treated Wooden Fence Panel (X3 Panels)
Visit shop2 offers from £183.60 - £190.00
View price history by clicking the chart icon.
The B&Q Feather Edge Fence Panel is designed for homeowners and landscapers looking to establish privacy and clearly define garden boundaries with a robust, traditional aesthetic. This 6 x 3ft panel provides solid, gap-free screening that enhances garden security while maintaining a natural look through its rich brown finish. While it offers excellent durability and wind resistance thanks to its reinforced design, users should note that as a 3ft tall panel, it is best suited for low-level partitions or garden zoning rather than full-height perimeter privacy.
| Colour | Brown |
|---|---|
| Brand | B&Q |
Yes, you can trim the width using a circular or hand saw, though you must treat the cut end immediately with wood preservative to prevent rot.
While the panel is designed for outdoor use, always check the specific product label to confirm if it has undergone pressure treatment for rot resistance.
You will need one post at the start and one at the end of each panel. If installing a continuous line, you will need a post between each 6ft section.
Yes, once the factory finish has weathered or been cleaned, you can paint or stain it with an exterior-grade wood paint in your preferred color.
Due to the solid nature of the feather edge boards and reinforcing battens, it is heavier than standard waney-edge lap panels, so we recommend two-person lifting.
Use wooden packers or rubber shims in the concrete post channel to eliminate movement and rattling.
Lightly sand the surface if rough, then apply a fresh coat of high-quality brown wood stain or preserver.
For installation, ensure you have measured your span correctly to match the 6-foot width. If using timber posts, it is recommended to use heavy-duty corner or U-shaped clips to securely fasten the rear battens to the posts. If using concrete posts, ensure the slot width is adequate for the board thickness. Regarding maintenance, the wood is provided in a brown finish that should be treated with a high-quality timber preservative or exterior wood stain every 1-2 years. This is essential to prevent moisture ingress, which can lead to swelling or long-term rot. Always check that the bottom of the panel does not have direct, prolonged contact with damp soil to extend its service life.