Antec P12R ARGB PWM Case Fan - Black

The reverse fan blade design helps to create a smoother, more consistent airflow pattern, improving intake efficiency and contributing to a cleaner overall aesthetic by reducing visible cable clutter from the front.

Yes, if your motherboard lacks a 3-pin ARGB header, you can use a separate ARGB controller that often comes with other PC components or can be purchased independently to manage lighting effects.

The fan has an expected lifespan of 30,000 hours at 40°C and 40,000 hours at 25°C, indicating good durability for long-term use.

PWM (Pulse Width Modulation) allows the fan speed to be dynamically adjusted based on system temperatures, optimizing cooling performance when needed and reducing noise when the system is idle or under light load.

The fan measures 120mm x 120mm x 25mm, making it a standard 120mm size that fits most common PC case fan mounts.

The airflow range is 55.31 - 61.46 CFM, and the maximum air pressure is 1.07 mmH2O. These specifications indicate strong airflow capabilities for case ventilation.

The noise level ranges from 14.2 dB(A) at lower speeds to 29.5 dB(A) at maximum speed, providing a generally quiet operation, especially at moderate RPMs.

Verify the 4-pin fan connector is securely plugged into the motherboard's fan header. Check if the fan header is receiving power and try a different header if available.

Ensure the 3-pin LED connector is properly attached to a compatible ARGB header. Check your motherboard's or ARGB controller's software for correct settings and driver installation.

Confirm that the anti-vibration rubber pads are correctly installed. Ensure the fan is securely mounted and not touching any case components. Check fan speed; lower RPMs generally result in less noise.

Ensure the fan is connected to a 4-pin PWM header. Check your motherboard's BIOS or fan control software to confirm PWM mode is enabled for the connected header.