Best current price£11.95from eBay
Shopping.co.uk recommended and popular offers
eBay£11.95Visit shop 4"" INCH FLANGED TANK/LINER CONNECTOR PIPE FITTING KOI FISH POND PUMP FILTER
Visit shop
B&Q£12.95Visit shop B&Q - 4'' Pond Solvent Based Tank/liner Connector
Visit shop2 offers from £11.95 - £12.95
View price history by clicking the chart icon.
This guide is for pond owners and DIY enthusiasts looking to create a watertight seal for their pond liners or tanks using the Pisces 4" Pond Liner Connector. The primary benefit is a secure, leak-proof connection, ensuring the integrity of your pond. However, proper solvent welding technique is crucial for optimal performance. This guide covers setup, best practices, and troubleshooting to help you get the most out of your Pisces 4" Pond Liner Connector.
| Brand | Pisces |
|---|
This connector is designed for use with 4-inch (110mm) solvent fitting pipes.
Use solvent cement specifically designed for the pipe material you are using, following the manufacturer's instructions.
Carefully cut a 4-inch (110mm) hole in the pond liner. A hole saw or a sharp utility knife can be used.
Allow the solvent cement to cure completely. The curing time will vary depending on the product, so always refer to the manufacturer's instructions.
The Pisces 4" Pond Liner Connector is designed for use with rigid, solvent weld fitting pipes. It is not recommended for use with flexible pipes.
The connector is made of tough black plastic, and the screws are stainless steel.
Replacement screws should be readily available at most hardware stores. Make sure to match the size and material (stainless steel) of the original screws.
While the black plastic offers some protection, prolonged direct sunlight may affect its lifespan. Consider shielding the connector from direct sunlight if possible.
Check the solvent weld for proper application. Ensure both surfaces were properly prepared and that sufficient solvent cement was used. If necessary, cut out the connection and repeat the process.
Ensure both the pipe and connector are clean and free of debris. Apply more solvent cement to provide lubrication. Make sure you are using the correct size pipe for the connector.
