Tetrion All Purpose Filler - 1.5Kg
Best current price£19.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£19.99Visit shop B&Q - All Purpose Ready Mixed Filler Wood Stone Concrete Bricks Metal 1.5Kg X3
Visit shopB&Q£19.99Visit shop All Offers
3 offers from £19.99 - £20.99
View price history by clicking the chart icon.
B&QB&Q - All Purpose Ready Mixed Filler Wood Stone Concrete Bricks Metal 1.5Kg X3
Free delivery in 1–3 days
£19.99
Visit shop
eBayTetrion All Purpose Ready Mixed Filler Wood Stone Concrete Bricks Metal 1.5kg x3
Free delivery in 1–3 days
£19.99
Visit shop
Tetrion All Purpose Ready Mixed Filler Wood Stone Concrete Bricks Metal 1.5kg x3Free delivery in 1–3 days£20.99Visit shop →
Product Information
Full details
The Tetrion All Purpose Filler is designed for DIY enthusiasts and professionals needing a reliable, versatile filler for both interior and exterior repairs. Its key benefit is a smooth, permanent, and over-paintable finish suitable for a wide range of household materials. A potential caveat is the 24-hour drying time before over-painting, requiring some planning for projects.
All features
| Model Part Number | TFP022 |
|---|---|
| Brand | Tetrion |
Extended Product Information
FAQs
Can I use Tetrion All Purpose Filler for large holes?
Yes, for deep or large repairs, it is recommended to apply the filler in multiple thin layers, allowing each layer to set before applying the next. Using a stiffer mix (more powder, less water) will also help prevent sagging on vertical surfaces.
How long does the mixed filler remain usable?
The mixed filler remains workable for up to 1 hour after preparation, depending on the ambient temperature and humidity.
What is the drying time before I can paint over it?
The filler sets firmly in approximately 2 hours, but it must be left for 24 hours before it is suitable for over-painting.
Can this filler be used on kitchen surfaces like countertops?
While versatile, it is not specifically designed for high-contact or water-submerged surfaces. It is best suited for general wall, ceiling, wood, and masonry repairs.
Do I need to prime metal before filling?
Yes, it is essential to prime any metal surfaces before applying the filler to prevent rust from forming underneath the repair.
What is the shelf life of the Tetrion All Purpose Powder?
When stored correctly in a cool, dry place with the container sealed, the powder has a long shelf life. Always check the packaging for any specific expiry information.
Can I sand the filler after it has dried?
Yes, the dried filler is sandable, allowing you to achieve a smooth finish that blends seamlessly with the surrounding surface.
Troubleshooting
Filler is not setting or setting very slowly.
Ensure you are using the correct water-to-filler ratio. Too much water can slow down the setting process. Check that the ambient temperature is not excessively cold, as this can also affect setting times.
Filler is shrinking after drying.
Shrinkage typically occurs if the filler is applied too thickly in one go or if the surface is not adequately prepared. For deep repairs, apply filler in multiple thinner layers, allowing each to set before applying the next. Ensure the surface is sound and free from loose material.
Difficulty in sanding or shaping the dried filler.
Ensure you are waiting for the filler to fully cure before attempting to sand or shape. If it's still too soft, it may be an issue with the mix ratio or environmental conditions. If it has become too hard, it might be due to an incorrect ratio or over-application of powder.
Paint is peeling or not adhering to the filler.
Wait the full 24 hours for the filler to become properly over-paintable. Ensure the surface of the filler is clean and free from dust before painting. A light sanding may improve adhesion. Consider using a primer on the filler before applying topcoats.
Pros and Cons
Pros
- Suitable for a wide range of surfaces.
- Can be used for both internal and external repairs.
- Dries without shrinkage for a stable repair.
- Offers a long working time after mixing.
- Provides a smooth, sandable, and drillable finish.
- Can be over-painted for a seamless look.
Cons
- Requires 24 hours before being over-painted.
- Surface must be clean, dry, and free from loose materials for best results.
- Metal surfaces require priming to prevent rust.
- Requires mixing with water to achieve the correct consistency.
Setup, Compatibility & Care
Preparation: Before application, ensure all surfaces are clean, dry, and free from dust, grease, and loose material. For metal surfaces, it is crucial to prime them first to prevent rust formation.
Mixing: To prepare the filler, mix approximately 2 to 2.5 parts of Tetrion All Purpose Powder with 1 part of water. Aim for a smooth, consistent paste. The mixture remains workable for up to 1 hour. For applications on wood, large repairs, or vertical surfaces, a stiffer mix (more filler, less water) is recommended to improve stability and prevent slumping.
Application: Apply the filler using a filling knife or trowel, pressing firmly into the repair area. Smooth off the excess to match the surrounding surface.
Drying: The filler will set firmly in approximately 2 hours. It becomes over-paintable after 24 hours.
Compatibility: Tetrion All Purpose Filler is compatible with most common household building materials including plaster, wood, stone, and brickwork. It is also suitable for both interior and exterior applications.
Care: Store the powder in a cool, dry place, ensuring the container is well-sealed. Once mixed, unused filler should be disposed of responsibly; do not return it to the original container.